From: Ricky CX Wu <ricky.cx.wu.wiwynn@xxxxxxxxx>
Add RTQ6056 as 2nd source ADC sensor on Medusa Board.
Add power sensors on Medusa board:
- Add XDP710 as 2nd source HSC to monitor P48V PSU power.
- Add MP5023 as P12V efuse (Driver exists but un-documented).
- Add PMBUS sensors as P12V Delta Module.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@xxxxxxxxx>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 45 ++++++++++++++++++-
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..e486b9d78f61 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -284,15 +284,25 @@ &i2c10 {
&i2c11 {
status = "okay";
power-sensor@10 {
- compatible = "adi, adm1272";
+ compatible = "adi,adm1272";
reg = <0x10>;
};
+ power-sensor@11 {
+ compatible = "infineon,xdp710";
+ reg = <0x11>;
+ };
+
power-sensor@12 {
- compatible = "adi, adm1272";
+ compatible = "adi,adm1272";
reg = <0x12>;
};
+ power-sensor@13 {
+ compatible = "infineon,xdp710";
+ reg = <0x13>;
+ };
+
gpio@20 {
compatible = "nxp,pca9555";
reg = <0x20>;
@@ -321,6 +331,17 @@ gpio@23 {
#gpio-cells = <2>;
};
+ power-sensor@40 {
+ compatible = "mps,mp5023";
+ reg = <0x40>;
+ };
+
+ adc@41 {
+ compatible = "richtek,rtq6056";
+ reg = <0x41>;
+ #io-channel-cells = <1>;
+ };
+
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
@@ -345,6 +366,26 @@ eeprom@54 {
compatible = "atmel,24c256";
reg = <0x54>;
};
+
+ power-sensor@62 {
+ compatible = "pmbus";
+ reg = <0x62>;
+ };
+
+ power-sensor@64 {
+ compatible = "pmbus";
+ reg = <0x64>;
+ };
+
+ power-sensor@65 {
+ compatible = "pmbus";
+ reg = <0x65>;
+ };
+
+ power-sensor@68 {
+ compatible = "pmbus";
+ reg = <0x68>;
+ };
};
&i2c12 {
--
2.25.1
