On 03/19/2015 02:18 AM, Hyungwon Hwang wrote: > Dear Daniel, > > On Thu, 19 Mar 2015 01:13:21 +0000 > Daniel Stone <daniel-rLtY4a/8tF1rovVCs/uTlw@xxxxxxxxxxxxxxxx> wrote: > >> Hi Hyungwon, >> >> On 19 March 2015 at 01:02, Hyungwon Hwang <human.hwang-Sze3O3UU22JBDgjK7y7TUQ@xxxxxxxxxxxxxxxx> >> wrote: >>>>> + /* >>>>> + * The input PLL clock for MIPI DSI in Exynos5433 seems >>>>> to be fixed >>>>> + * by OSC CLK. >>>>> + */ >>>>> + fin = 24 * MHZ; >>>> >>>> Er, is this always true on other platforms as well? Shouldn't this >>>> be a part of the DeviceTree description? >>> >>> I forgot to change the comment in development. Finally it is found >>> that all exynos mipi dsi's fin is OSC clk which is 24 MHz. So I >>> will remove the comment, but remain the code as it is. >> >> Fair enough. Should pll_clk be removed from the DT description then, >> if it's fixed to the oscillator? > > Yes. It is redundant to represent pll_clk in DT, and it should be > removed. Why do you think OSC clk determines value of pll_clk? pll_clk is mapped to SCLK_MIPI[01] or SCLK_DSIM0 gate with few dividers and muxes above. So at least in theory it can differ from osc clk. Additionally this gate should be enabled so you cannot just remove it from DT. Regards Andrzej > >> >>> Thanks for your review. I will send it again with the changes you >>> suggested. >> >> Thanks very much! >> >> Cheers, >> Daniel > > Best regards, > Hyungwon Hwang > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@xxxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
