On 30/08/2024 13:33, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
>
> Adding 100mhz & 200mhz pinmux support for uSDHC helps to enable
> higher speed modes for SD (SDR50, DDR50, SDR104) and
> eMMC (such as HS200, HS400/HS400ES).
>
> Signed-off-by: Radu Pirea <radu-nicolae.pirea@xxxxxxx>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/s32g2.dtsi | 153 ++++++++++++++++++
> .../arm64/boot/dts/freescale/s32g274a-evb.dts | 4 +
> .../boot/dts/freescale/s32g274a-rdb2.dts | 4 +
> arch/arm64/boot/dts/freescale/s32g3.dtsi | 153 ++++++++++++++++++
> .../boot/dts/freescale/s32g399a-rdb3.dts | 4 +
> 5 files changed, 318 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> index fa054bfe7d5c..7be430b78c83 100644
> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> @@ -162,6 +162,159 @@ jtag-grp4 {
> slew-rate = <166>;
> };
> };
> +
> + pinctrl_usdhc0: usdhc0grp-pins {
> + usdhc0-grp0 {
Are you sure that this passes dtbs_check W=1?
Best regards,
Krzysztof
