[PATCH v3] dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It seems like we missed migrating the complete information from the old
DT binding where we had described what the opp-supported-hw is supposed
to describe. Hence, bring back the description from the previous binding
to the current one along with a bit more context on what the values are
supposed to be.

Fixes: e576a9a8603f ("dt-bindings: cpufreq: Convert ti-cpufreq to json schema")
Signed-off-by: Dhruva Gole <d-gole@xxxxxx>
---

Changes in v3:
- Use the items: and then provide description for both required items.
  This tries to address Rob's comments on previous revision.
- I've not use min/max Items as the 2 descriptions items implicitly
  imply that number of bitfields needed are 2.
- Link to v2: https://lore.kernel.org/all/20240905-b4-opp-dt-binding-fix-v2-1-1e3d2a06748d@xxxxxx/

Changes in v2:
- Drop the patch where I updated Maintainers since it's already picked
  by Viresh.
- Add more details of how to populate the property based on device
  documents like TRM/ datasheet.
- Link to v1: https://lore.kernel.org/r/20240903-b4-opp-dt-binding-fix-v1-0-f7e186456d9f@xxxxxx

---
 .../opp/operating-points-v2-ti-cpu.yaml         | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml
index fd0c8d5c5f3e..700af89487d0 100644
--- a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml
+++ b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml
@@ -45,7 +45,22 @@ patternProperties:
       clock-latency-ns: true
       opp-hz: true
       opp-microvolt: true
-      opp-supported-hw: true
+      opp-supported-hw:
+        items:
+          - description: |
+            Which revision of the SoC the OPP is supported by.
+            This can be easily obtained from the datasheet of the
+            part being ordered/used. For eg. it will be 0x01 for SR1.0
+          - description : |
+            Which eFuse bits indicate this OPP is available.
+            The device datasheet has a table talking about Device Speed Grades.
+            If one were to sort this table and only retain the unique elements
+            of the MAXIMUM OPERATING FREQUENCY starting from the first row
+            which tells the lowest OPP, to the highest. The corresponding bits
+            need to be set based on N elements of speed grade the device supports.
+            So, if there are 3 possible unique MAXIMUM OPERATING FREQUENCY
+            in the table, then BIT(0), (1) and (2) will be set, which means
+            the value shall be 0x7.
       opp-suspend: true
       turbo-mode: true
 
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux