Re: [PATCH 3/3] mtd: nand: add NAND driver for Broadcom STB NAND controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Mar 16, 2015 at 11:55:16AM -0700, Florian Fainelli wrote:
> On 06/03/15 17:18, Brian Norris wrote:
> > +static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
> > +{
> > +	static const unsigned int block_sizes_v6[] = { 8, 16, 128, 256, 512, 1024, 2048, 0 };
> > +	static const unsigned int block_sizes_v4[] = { 16, 128, 8, 512, 256, 1024, 2048, 0 };
> > +	static const unsigned int page_sizes[] = { 512, 2048, 4096, 8192, 0 };
> > +
> > +	ctrl->nand_version = nand_readreg(ctrl, 0) & 0xffff;
> > +
> > +	/* Only support v4.0+? */
> > +	if (ctrl->nand_version < 0x0400)
> > +		return -ENODEV;
> 
> It could be nice to have an informative error message here that this is
> either:
> 
> - an unknown controller revision (> 7.1)
> - an older controller revision
> - a check against the compatible property, just in case?

I'll add a message that the revision is not supported. The DT binding
should catch this too, so this check is just an extra safeguard.

> [snip]
> 
> > +		ctrl->cs_offsets = brcmnand_cs_offsets_v71;
> > +	} else {
> > +		ctrl->cs_offsets = brcmnand_cs_offsets;
> > +
> > +		/* pre-v5.0 has a different CS0 offset layout */
> > +		if (ctrl->nand_version <= 0x0500)
> > +			ctrl->cs0_offsets = brcmnand_cs_offsets_cs0;
> 
> Based on this check, should the comment should be "pre-v5.0 and v5.0
> have a different CS0 offset layout"?

Yes. Fixed.

Brian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux