On Fri, Sep 13, 2024 at 06:08:06PM +0300, Dzmitry Sankouski wrote:
> Add support for s2dos05 display / touchscreen PMIC
>
> Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
> ---
> .../boot/dts/qcom/sdm845-samsung-starqltechn.dts | 77 ++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
> index 865253d8f0c7..5e5684f84ffb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
> @@ -39,6 +39,9 @@ framebuffer: framebuffer@9d400000 {
> height = <2960>;
> stride = <(1440 * 4)>;
> format = "a8r8g8b8";
> + vci-supply = <&s2dos05_ldo4>;
> + vddr-supply = <&s2dos05_buck1>;
> + vdd3-supply = <&s2dos05_ldo1>;
> };
> };
>
> @@ -101,6 +104,66 @@ key-wink {
> };
> };
>
> + i2c21 {
> + compatible = "i2c-gpio";
> + sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
> + scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
> + i2c-gpio,delay-us = <2>;
> + pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmic@60 {
> + compatible = "samsung,s2dos05";
> + reg = <0x60>;
> +
> + regulators {
> + s2dos05_ldo1: ldo1 {
> + regulator-active-discharge = <1>;
> + regulator-enable-ramp-delay = <12000>;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-name = "s2dos05-ldo1";
Useless name. Please use rather names from the schematics, but I guess
you might not have them, so maybe downstream has reasonable name?
Best regards,
Krzysztof
