[PATCH v3 6/6] ARM: dts: rockchip: Add Relfor Saib board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Saib is an consumer electronics board from Relfor labs
Features:
    - Rockchip RV1109
    - 1GB DDR4
    - 4GB eMMC
    - Realtek RTL8821CS Wi-Fi/BT
    - IR transmitter/receiver
    - RV3028 RTC
    - Switch
    - User leds

Add support for it.

Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
---

Notes:
    v3:
    - sort nodes in aplhabetical order
    
    v2:
    - Drop status=okay in new nodes

 arch/arm/boot/dts/rockchip/Makefile           |   1 +
 .../boot/dts/rockchip/rv1109-relfor-saib.dts  | 422 ++++++++++++++++++
 2 files changed, 423 insertions(+)
 create mode 100644 arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts

diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index ab4cd9aab722..716f5540e438 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb \
+	rv1109-relfor-saib.dtb \
 	rv1109-sonoff-ihost.dtb \
 	rv1126-edgeble-neu2-io.dtb \
 	rv1126-sonoff-ihost.dtb \
diff --git a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
new file mode 100644
index 000000000000..a63356ade3b7
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Relfor Labs Pvt. Ltd.
+ */
+
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip RV1109 Relfor Saib Board";
+	compatible = "relfor,saib", "rockchip,rv1109";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DATA>;
+			label = "GPIO User Switch";
+			linux,input-type = <1>;
+		};
+	};
+
+	ir_receiver: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3  RK_PB4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	ir_transmitter: ir-transmitter {
+		compatible = "pwm-ir-tx";
+		pwms = <&pwm11 0 10000000 1>;
+	};
+
+	led-controller {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_INDICATOR;
+			max-brightness = <65535>;
+
+			led-0 {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm9 0 50000 0>;
+			};
+
+			led-1 {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm6 0 50000 0>;
+			};
+
+			led-2 {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm10 0 50000 0>;
+			};
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			pwms = <&pwm2 0 50000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+
+		led-1 {
+			pwms = <&pwm8 0 50000 0>;
+			max-brightness = <0>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			pwms = <&pwm5 0 50000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc0>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+
+	thermal_sensor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-40000) 826
+					     85000 609>;
+	};
+
+	thermal_sensor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 2>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-40000) 826
+					     85000 609>;
+	};
+
+	vcc_0v8: vcc-0v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v8";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <150>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v2_ddr: vcc-1v2-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_ddr";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <75000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <51000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc1v8_ir: vcc1v8-ir {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_ir";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_2v5_ddr: vcc-2v5-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v5_ddr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <75000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_arm: vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <720000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-settling-time-up-us = <18000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_npu_vepu: vdd-npu-vepu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_npu_vepu";
+		regulator-min-microvolt = <650000>;
+		regulator-max-microvolt = <950000>;
+		regulator-settling-time-up-us = <18000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>;
+	pinctrl-names = "default";
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3m2_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc0: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rtc_int>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2s0 {
+	/delete-property/ pinctrl-0;
+	rockchip,trcm-sync-rx-only;
+	pinctrl-0 =  <&i2s0m0_sclk_rx>,
+		     <&i2s0m0_lrck_rx>,
+		     <&i2s0m0_sdi0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	bluetooth-pins {
+		bt_reset: bt-reset {
+			rockchip,pins =
+			<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins =
+			<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		bt_wake_host: bt-wake-host {
+			rockchip,pins =
+			<1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	buttons {
+		switch: switch {
+			rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_rx: ir-rx {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pwm {
+		pwm0m0_pins_pull_up: pwm0m0-pins-pull-up {
+			rockchip,pins =
+			/* pwm0_pin_m0 */
+			<0 RK_PB6 3 &pcfg_pull_up>;
+		};
+		pwm1m0_pins_pull_up: pwm1m0-pins-pull-up {
+			rockchip,pins =
+			/* pwm1_pin_m0 */
+			<0 RK_PB7 3 &pcfg_pull_up>;
+		};
+	};
+
+	rtc {
+		rtc_int: rtc-int {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc3v3_sys>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio4-supply = <&vcc3v3_sys>;
+	vccio5-supply = <&vcc3v3_sys>;
+	vccio6-supply = <&vcc3v3_sys>;
+	vccio7-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pwm0 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm0m0_pins_pull_up>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm1 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm1m0_pins_pull_up>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm2m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-0 = <&pwm6m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-0 = <&pwm8m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm9 {
+	pinctrl-0 = <&pwm9m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm10 {
+	pinctrl-0 = <&pwm10m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm11 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm11m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		device-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux