The GW75xx has a LIS2DE12TR 3-axis accelerometer on the I2C bus with an interrupt pin. Add it to the device-tree. Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> ---- v2: - make sure compatible is on top and vendor specific props are at the end per: https://docs.kernel.org/devicetree/bindings/dts-coding-style.html - fix typo in commit message --- .../boot/dts/freescale/imx8mm-venice-gw75xx.dtsi | 16 ++++++++++++++++ .../boot/dts/freescale/imx8mp-venice-gw75xx.dtsi | 16 ++++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi index 5eb92005195c..d17e1f375be4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi @@ -116,6 +116,16 @@ &i2c2 { pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + st,drdy-int-pin = <1>; + }; + eeprom@52 { compatible = "atmel,24c32"; reg = <0x52>; @@ -198,6 +208,12 @@ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000040 /* GPIOC */ >; }; + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x159 + >; + }; + pinctrl_gpio_leds: gpioledgrp { fsl,pins = < MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x6 /* LEDG */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi index 0d40cb0f05f6..c9934cf98942 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi @@ -104,6 +104,16 @@ &i2c2 { pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + st,drdy-int-pin = <1>; + }; + eeprom@52 { compatible = "atmel,24c32"; reg = <0x52>; @@ -204,6 +214,12 @@ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCI_WDIS# */ >; }; + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x159 + >; + }; + pinctrl_gpio_leds: gpioledgrp { fsl,pins = < MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x6 /* LEDG */ -- 2.25.1
