TI's opt3002 light-to-digital sensor provides the functionality of an optical power meter within a single device. It shares a lot of similarities with their opt3001 model but has a wide spectral bandwidth, ranging from 300 nm to 1000 nm. This patch set adds support for the TI opt3002 by extending the opt3001 driver. In addition, a missing full-scale range value for the opt3001 is added, resulting in higher precision when setting event trigger values. See http://www.ti.com/product/OPT3002 for more information. Signed-off-by: Emil Gedenryd <emil.gedenryd@xxxxxxxx> --- Emil Gedenryd (3): iio: light: opt3001: add missing full-scale range value iio: light: opt3001: add support for TI's opt3002 light sensor dt-bindings: iio: light: opt3001: add compatible for opt3002 .../devicetree/bindings/iio/light/ti,opt3001.yaml | 1 + drivers/iio/light/Kconfig | 2 +- drivers/iio/light/opt3001.c | 203 +++++++++++++++++---- 3 files changed, 172 insertions(+), 34 deletions(-) --- base-commit: 5be63fc19fcaa4c236b307420483578a56986a37 change-id: 20240828-add_opt3002-40552c1a2f77 Best regards, -- Emil Gedenryd <emil.gedenryd@xxxxxxxx>
