[PATCH v4 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The AD7606C-16 and AD7606C-18 are pretty similar with the AD7606B.
The main difference between AD7606C-16 & AD7606C-18 is the precision in
bits (16 vs 18).
Because of that, some scales need to be defined for the 18-bit variants, as
they need to be computed against 2**18 (vs 2**16 for the 16 bit-variants).

Because the AD7606C-16,18 also supports bipolar & differential channels,
for SW-mode, the default range of 10 V or ±10V should be set at probe.
On reset, the default range (in the registers) is set to value 0x3 which
corresponds to '±10 V single-ended range', regardless of bipolar or
differential configuration.

Aside from the scale/ranges, the AD7606C-16 is similar to the AD7606B.

The AD7606C-18 variant offers 18-bit precision. Because of this, the
requirement to use this chip is that the SPI controller supports padding
of 18-bit sequences to 32-bit arrays.

Datasheet links:
  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-18.pdf

Signed-off-by: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
---
 drivers/iio/adc/ad7606.c     | 266 +++++++++++++++++++++++++++++++----
 drivers/iio/adc/ad7606.h     |  17 ++-
 drivers/iio/adc/ad7606_spi.c |  55 ++++++++
 3 files changed, 309 insertions(+), 29 deletions(-)

diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 4c3fbb28f790..999c4411859e 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -28,14 +28,44 @@
 
 #include "ad7606.h"
 
+typedef void (*ad7606c_chan_setup_cb_t)(struct ad7606_state *st, int ch,
+					bool bipolar, bool differential);
+
 /*
  * Scales are computed as 5000/32768 and 10000/32768 respectively,
  * so that when applied to the raw values they provide mV values
  */
-static const unsigned int ad7606_scale_avail[2] = {
+static const unsigned int ad7606_16bit_hw_scale_avail[2] = {
 	152588, 305176
 };
 
+static const unsigned int ad7606_18bit_hw_scale_avail[2] = {
+	38147, 76294
+};
+
+static const unsigned int ad7606c_16_scale_single_ended_unipolar_avail[3] = {
+	76294, 152588, 190735,
+};
+
+static const unsigned int ad7606c_16_scale_single_ended_bipolar_avail[5] = {
+	76294, 152588, 190735, 305176, 381470
+};
+
+static const unsigned int ad7606c_16_scale_differential_bipolar_avail[4] = {
+	152588, 305176, 381470, 610352
+};
+
+static const unsigned int ad7606c_18_scale_single_ended_unipolar_avail[3] = {
+	19073, 38147, 47684
+};
+
+static const unsigned int ad7606c_18_scale_single_ended_bipolar_avail[5] = {
+	19073, 38147, 47684, 76294, 95367
+};
+
+static const unsigned int ad7606c_18_scale_differential_bipolar_avail[4] = {
+	38147, 76294, 95367, 152588
+};
 
 static const unsigned int ad7616_sw_scale_avail[3] = {
 	76293, 152588, 305176
@@ -82,11 +112,19 @@ static int ad7606_reg_access(struct iio_dev *indio_dev,
 	}
 }
 
-static int ad7606_read_samples(struct ad7606_state *st)
+static int ad7606_read_samples(struct ad7606_state *st, bool sign_extend_samples)
 {
+	unsigned int storagebits = st->chip_info->channels[1].scan_type.storagebits;
 	unsigned int num = st->chip_info->num_channels - 1;
-	u16 *data = st->data;
-	int ret;
+	u32 *data32 = st->data.d32;
+	u16 *data16 = st->data.d16;
+	void *data;
+	int i, ret;
+
+	if (storagebits > 16)
+		data = data32;
+	else
+		data = data16;
 
 	/*
 	 * The frstdata signal is set to high while and after reading the sample
@@ -108,11 +146,25 @@ static int ad7606_read_samples(struct ad7606_state *st)
 			return -EIO;
 		}
 
-		data++;
+		if (storagebits > 16)
+			data32++;
+		else
+			data16++;
 		num--;
 	}
 
-	return st->bops->read_block(st->dev, num, data);
+	ret = st->bops->read_block(st->dev, num, data);
+	if (ret)
+		return ret;
+
+	if (storagebits == 16 || !sign_extend_samples)
+		return 0;
+
+	/* For 18 bit samples, we need to sign-extend samples to 32 bits */
+	for (i = 0; i < num; i++)
+		data32[i] = sign_extend32(data32[i], 17);
+
+	return 0;
 }
 
 static irqreturn_t ad7606_trigger_handler(int irq, void *p)
@@ -124,11 +176,11 @@ static irqreturn_t ad7606_trigger_handler(int irq, void *p)
 
 	guard(mutex)(&st->lock);
 
-	ret = ad7606_read_samples(st);
+	ret = ad7606_read_samples(st, true);
 	if (ret)
 		goto error_ret;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+	iio_push_to_buffers_with_timestamp(indio_dev, st->data.d16,
 					   iio_get_time_ns(indio_dev));
 error_ret:
 	iio_trigger_notify_done(indio_dev->trig);
@@ -142,6 +194,7 @@ static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch,
 			      int *val)
 {
 	struct ad7606_state *st = iio_priv(indio_dev);
+	unsigned int storagebits = st->chip_info->channels[1].scan_type.storagebits;
 	int ret;
 
 	gpiod_set_value(st->gpio_convst, 1);
@@ -152,9 +205,13 @@ static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch,
 		goto error_ret;
 	}
 
-	ret = ad7606_read_samples(st);
-	if (ret == 0)
-		*val = sign_extend32(st->data[ch], 15);
+	ret = ad7606_read_samples(st, false);
+	if (ret == 0) {
+		if (storagebits > 16)
+			*val = sign_extend32(st->data.d32[ch], 17);
+		else
+			*val = sign_extend32(st->data.d16[ch], 15);
+	}
 
 error_ret:
 	gpiod_set_value(st->gpio_convst, 0);
@@ -267,7 +324,7 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			ch = chan->address;
 		cs = &st->chan_scales[ch];
 		i = find_closest(val2, cs->scale_avail, cs->num_scales);
-		ret = st->write_scale(indio_dev, ch, i);
+		ret = st->write_scale(indio_dev, ch, i + cs->reg_offset);
 		if (ret < 0)
 			return ret;
 		cs->range = i;
@@ -350,6 +407,18 @@ static const struct iio_chan_spec ad7606_channels_16bit[] = {
 	AD7606_CHANNEL(7, 16),
 };
 
+static const struct iio_chan_spec ad7606_channels_18bit[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	AD7606_CHANNEL(0, 18),
+	AD7606_CHANNEL(1, 18),
+	AD7606_CHANNEL(2, 18),
+	AD7606_CHANNEL(3, 18),
+	AD7606_CHANNEL(4, 18),
+	AD7606_CHANNEL(5, 18),
+	AD7606_CHANNEL(6, 18),
+	AD7606_CHANNEL(7, 18),
+};
+
 /*
  * The current assumption that this driver makes for AD7616, is that it's
  * working in Hardware Mode with Serial, Burst and Sequencer modes activated.
@@ -410,6 +479,18 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
 		.oversampling_avail = ad7606_oversampling_avail,
 		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
 	},
+	[ID_AD7606C_16] = {
+		.channels = ad7606_channels_16bit,
+		.num_channels = 9,
+		.oversampling_avail = ad7606_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	},
+	[ID_AD7606C_18] = {
+		.channels = ad7606_channels_18bit,
+		.num_channels = 9,
+		.oversampling_avail = ad7606_oversampling_avail,
+		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+	},
 	[ID_AD7616] = {
 		.channels = ad7616_channels,
 		.num_channels = 17,
@@ -581,7 +662,122 @@ static const struct iio_trigger_ops ad7606_trigger_ops = {
 	.validate_device = iio_trigger_validate_own_device,
 };
 
-static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
+static void ad7606c_18_chan_setup(struct ad7606_state *st, int ch,
+				  bool bipolar, bool differential)
+{
+	struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
+	if (differential) {
+		cs->scale_avail =
+			ad7606c_18_scale_differential_bipolar_avail;
+		cs->num_scales =
+			ARRAY_SIZE(ad7606c_18_scale_differential_bipolar_avail);
+		/* Bipolar differential ranges start at 8 (b1000) */
+		cs->reg_offset = 8;
+		cs->range = 1;
+	} else if (bipolar) {
+		cs->scale_avail =
+			ad7606c_18_scale_single_ended_bipolar_avail;
+		cs->num_scales =
+			ARRAY_SIZE(ad7606c_18_scale_single_ended_bipolar_avail);
+		cs->range = 3;
+	} else {
+		cs->scale_avail =
+			ad7606c_18_scale_single_ended_unipolar_avail;
+		cs->num_scales =
+			ARRAY_SIZE(ad7606c_18_scale_single_ended_unipolar_avail);
+		/* Unipolar single-ended ranges start at 5 (b0101) */
+		cs->reg_offset = 5;
+		cs->range = 1;
+	}
+}
+
+static void ad7606c_16_chan_setup(struct ad7606_state *st, int ch,
+				  bool bipolar, bool differential)
+{
+	struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
+	if (differential) {
+		cs->scale_avail =
+			ad7606c_16_scale_differential_bipolar_avail;
+		cs->num_scales =
+			ARRAY_SIZE(ad7606c_16_scale_differential_bipolar_avail);
+		/* Bipolar differential ranges start at 8 (b1000) */
+		cs->reg_offset = 8;
+		cs->range = 1;
+	} else if (bipolar) {
+		cs->scale_avail =
+			ad7606c_16_scale_single_ended_bipolar_avail;
+		cs->num_scales =
+			ARRAY_SIZE(ad7606c_16_scale_single_ended_bipolar_avail);
+		cs->range = 3;
+	} else {
+		cs->scale_avail =
+			ad7606c_16_scale_single_ended_unipolar_avail;
+		cs->num_scales =
+			ARRAY_SIZE(ad7606c_16_scale_single_ended_unipolar_avail);
+		/* Unipolar single-ended ranges start at 5 (b0101) */
+		cs->reg_offset = 5;
+		cs->range = 1;
+	}
+}
+
+static int ad7606c_sw_mode_setup_channels(struct iio_dev *indio_dev,
+					  ad7606c_chan_setup_cb_t chan_setup_cb)
+{
+	unsigned int num_channels = indio_dev->num_channels - 1;
+	struct ad7606_state *st = iio_priv(indio_dev);
+	bool chan_configured[AD760X_MAX_CHANNELS] = {};
+	struct device *dev = st->dev;
+	int ret;
+	u32 ch;
+
+	/* We need to hook this first */
+	ret = st->bops->sw_mode_config(indio_dev);
+	if (ret)
+		return ret;
+
+	device_for_each_child_node_scoped(dev, child) {
+		bool bipolar, differential;
+		u32 pins[2];
+
+		ret = fwnode_property_read_u32(child, "reg", &ch);
+		if (ret)
+			continue;
+
+		/* channel number (here) is from 1 to num_channels */
+		if (ch == 0 || ch > num_channels) {
+			dev_warn(st->dev,
+				 "Invalid channel number (ignoring): %d\n", ch);
+			continue;
+		}
+
+		bipolar = fwnode_property_present(child, "bipolar");
+
+		ret = fwnode_property_read_u32_array(child, "diff-channels",
+						     pins, ARRAY_SIZE(pins));
+		/* Channel is differential, if pins are the same as 'reg' */
+		if (ret == 0 && pins[0] == ch && pins[1] == ch)
+			differential = true;
+		else
+			differential = false;
+
+		ch--;
+
+		chan_setup_cb(st, ch, bipolar, differential);
+		chan_configured[ch] = true;
+	}
+
+	/* Apply default configuration to unconfigured (via DT) channels */
+	for (ch = 0; ch < num_channels; ch++) {
+		if (!chan_configured[ch])
+			chan_setup_cb(st, ch, false, false);
+	}
+
+	return 0;
+}
+
+static int ad7606_sw_mode_setup(struct iio_dev *indio_dev, unsigned int id)
 {
 	unsigned int num_channels = indio_dev->num_channels - 1;
 	struct ad7606_state *st = iio_priv(indio_dev);
@@ -596,17 +792,30 @@ static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
 
 	indio_dev->info = &ad7606_info_sw_mode;
 
-	/* Scale of 0.076293 is only available in sw mode */
-	/* After reset, in software mode, ±10 V is set by default */
-	for (ch = 0; ch < num_channels; ch++) {
-		struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+	switch (id) {
+	case ID_AD7606C_18:
+		ret = ad7606c_sw_mode_setup_channels(indio_dev,
+						     ad7606c_18_chan_setup);
+		break;
+	case ID_AD7606C_16:
+		ret = ad7606c_sw_mode_setup_channels(indio_dev,
+						     ad7606c_16_chan_setup);
+		break;
+	default:
+		/* Scale of 0.076293 is only available in sw mode */
+		/* After reset, in software mode, ±10 V is set by default */
+		for (ch = 0; ch < num_channels; ch++) {
+			struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
+			cs->scale_avail = ad7616_sw_scale_avail;
+			cs->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
+			cs->range = 2;
+		}
 
-		cs->scale_avail = ad7616_sw_scale_avail;
-		cs->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
-		cs->range = 2;
+		ret = st->bops->sw_mode_config(indio_dev);
+		break;
 	}
 
-	ret = st->bops->sw_mode_config(indio_dev);
 	if (ret)
 		return ret;
 
@@ -655,9 +864,16 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	st->oversampling = 1;
 
 	cs = &st->chan_scales[0];
-	cs->range = 0;
-	cs->scale_avail = ad7606_scale_avail;
-	cs->num_scales = ARRAY_SIZE(ad7606_scale_avail);
+	switch (id) {
+	case ID_AD7606C_18:
+		cs->scale_avail = ad7606_18bit_hw_scale_avail;
+		cs->num_scales = ARRAY_SIZE(ad7606_18bit_hw_scale_avail);
+		break;
+	default:
+		cs->scale_avail = ad7606_16bit_hw_scale_avail;
+		cs->num_scales = ARRAY_SIZE(ad7606_16bit_hw_scale_avail);
+		break;
+	}
 
 	ret = devm_regulator_get_enable(dev, "avcc");
 	if (ret)
@@ -706,7 +922,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	st->write_scale = ad7606_write_scale_hw;
 	st->write_os = ad7606_write_os_hw;
 
-	ret = ad7606_sw_mode_setup(indio_dev);
+	ret = ad7606_sw_mode_setup(indio_dev, id);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index 2113ad460c0f..6b0897aa2dc7 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -22,7 +22,7 @@
 		.scan_type = {					\
 			.sign = 's',				\
 			.realbits = (bits),			\
-			.storagebits = (bits),			\
+			.storagebits = (bits) > 16 ? 32 : 16,	\
 			.endianness = IIO_CPU,			\
 		},						\
 }
@@ -45,7 +45,7 @@
 		.scan_type = {					\
 			.sign = 's',				\
 			.realbits = (bits),			\
-			.storagebits = (bits),			\
+			.storagebits = (bits) > 16 ? 32 : 16,	\
 			.endianness = IIO_CPU,			\
 		},						\
 }
@@ -88,6 +88,8 @@ struct ad7606_chip_info {
  *			such that it can be read via the 'read_avail' hook
  * @num_scales		number of elements stored in the scale_avail array
  * @range		voltage range selection, selects which scale to apply
+ * @reg_offset		offset for the register value, to be applied when
+ *			writing the value of 'range' to the register value
  */
 struct ad7606_chan_scale {
 #define AD760X_MAX_SCALE_SHOW		(AD760X_MAX_CHANNELS * 2)
@@ -95,6 +97,7 @@ struct ad7606_chan_scale {
 	int				scale_avail_show[AD760X_MAX_SCALE_SHOW];
 	unsigned int			num_scales;
 	unsigned int			range;
+	unsigned int			reg_offset;
 };
 
 /**
@@ -151,9 +154,13 @@ struct ad7606_state {
 	/*
 	 * DMA (thus cache coherency maintenance) may require the
 	 * transfer buffers to live in their own cache lines.
-	 * 16 * 16-bit samples + 64-bit timestamp
+	 * 16 * 16-bit samples + 64-bit timestamp - for AD7616
+	 * 8 * 32-bit samples + 64-bit timestamp - for AD7616C-18 (and similar)
 	 */
-	unsigned short			data[20] __aligned(IIO_DMA_MINALIGN);
+	union {
+		unsigned short d16[20];
+		unsigned int d32[10];
+	} data __aligned(IIO_DMA_MINALIGN);
 	__be16				d16[2];
 };
 
@@ -192,6 +199,8 @@ enum ad7606_supported_device_ids {
 	ID_AD7606_6,
 	ID_AD7606_4,
 	ID_AD7606B,
+	ID_AD7606C_16,
+	ID_AD7606C_18,
 	ID_AD7616,
 };
 
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
index e00f58a6a0e9..b8d630ad156d 100644
--- a/drivers/iio/adc/ad7606_spi.c
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -77,6 +77,18 @@ static const struct iio_chan_spec ad7606b_sw_channels[] = {
 	AD7606_SW_CHANNEL(7, 16),
 };
 
+static const struct iio_chan_spec ad7606c_18_sw_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+	AD7606_SW_CHANNEL(0, 18),
+	AD7606_SW_CHANNEL(1, 18),
+	AD7606_SW_CHANNEL(2, 18),
+	AD7606_SW_CHANNEL(3, 18),
+	AD7606_SW_CHANNEL(4, 18),
+	AD7606_SW_CHANNEL(5, 18),
+	AD7606_SW_CHANNEL(6, 18),
+	AD7606_SW_CHANNEL(7, 18),
+};
+
 static const unsigned int ad7606B_oversampling_avail[9] = {
 	1, 2, 4, 8, 16, 32, 64, 128, 256
 };
@@ -120,6 +132,19 @@ static int ad7606_spi_read_block(struct device *dev,
 	return 0;
 }
 
+static int ad7606_spi_read_block18to32(struct device *dev,
+				       int count, void *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_transfer xfer = {
+		.bits_per_word = 18,
+		.len = count,
+		.rx_buf = buf,
+	};
+
+	return spi_sync_transfer(spi, &xfer, 1);
+}
+
 static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)
 {
 	struct spi_device *spi = to_spi_device(st->dev);
@@ -283,6 +308,19 @@ static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
 	return 0;
 }
 
+static int ad7606c_18_sw_mode_config(struct iio_dev *indio_dev)
+{
+	int ret;
+
+	ret = ad7606B_sw_mode_config(indio_dev);
+	if (ret)
+		return ret;
+
+	indio_dev->channels = ad7606c_18_sw_channels;
+
+	return 0;
+}
+
 static const struct ad7606_bus_ops ad7606_spi_bops = {
 	.read_block = ad7606_spi_read_block,
 };
@@ -305,6 +343,15 @@ static const struct ad7606_bus_ops ad7606B_spi_bops = {
 	.sw_mode_config = ad7606B_sw_mode_config,
 };
 
+static const struct ad7606_bus_ops ad7606c_18_spi_bops = {
+	.read_block = ad7606_spi_read_block18to32,
+	.reg_read = ad7606_spi_reg_read,
+	.reg_write = ad7606_spi_reg_write,
+	.write_mask = ad7606_spi_write_mask,
+	.rd_wr_cmd = ad7606B_spi_rd_wr_cmd,
+	.sw_mode_config = ad7606c_18_sw_mode_config,
+};
+
 static int ad7606_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
@@ -315,8 +362,12 @@ static int ad7606_spi_probe(struct spi_device *spi)
 		bops = &ad7616_spi_bops;
 		break;
 	case ID_AD7606B:
+	case ID_AD7606C_16:
 		bops = &ad7606B_spi_bops;
 		break;
+	case ID_AD7606C_18:
+		bops = &ad7606c_18_spi_bops;
+		break;
 	default:
 		bops = &ad7606_spi_bops;
 		break;
@@ -333,6 +384,8 @@ static const struct spi_device_id ad7606_id_table[] = {
 	{ "ad7606-6", ID_AD7606_6 },
 	{ "ad7606-8", ID_AD7606_8 },
 	{ "ad7606b",  ID_AD7606B },
+	{ "ad7606c-16",  ID_AD7606C_16 },
+	{ "ad7606c-18",  ID_AD7606C_18 },
 	{ "ad7616",   ID_AD7616 },
 	{ }
 };
@@ -344,6 +397,8 @@ static const struct of_device_id ad7606_of_match[] = {
 	{ .compatible = "adi,ad7606-6" },
 	{ .compatible = "adi,ad7606-8" },
 	{ .compatible = "adi,ad7606b" },
+	{ .compatible = "adi,ad7606c-16" },
+	{ .compatible = "adi,ad7606c-18" },
 	{ .compatible = "adi,ad7616" },
 	{ }
 };
-- 
2.46.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux