Hello, This serie adds support for STMicroelectronics VD56G3 camera sensor. This is a 1.5M pixel global shutter camera available in both Mono (VD56G3) and colour (VD66GY) variants. The following features are supported: - Auto exposure with expo bias or - Manual exposure with analog / digital gain - H/V flip - vblank/hblank/link freq - Test pattern - Supported resolutions in both raw8/raw10 : - 1124x1364 - 1120x1360 - 1024x1280 - 1024x768 - 768x1024 - 720x1280 - 640x480 - 480x640 - 320x240 This driver supports coldstart parameters for internal AE feature. To make it work, the driver save gain/expo values in ctrl's cur.val during poweroff phase. This implementation transgress V4L2 rules... Any advice to make it proper would be greatly appreciated. Driver tested on RB5 and RPI (with and without libcamera) for V1. V2 and V3 mainly tested on RPI. --- v2 -> v3: - driver: Unify PM vd56g3_resume/suspend functions with vd56g3_power_on/off - driver: Add v4l2_fwnode ctrls parse and addition - driver: Exposure is bounded by a minimum number of lines - driver: Minor improvements while handling return values - driver: Move to __pm_runtime_put_autosuspend() - driver: Follow rules and convention for driver naming - dt-bindings: Improve st-leds description - dt-bindings: Add missing additionnalProperties on 'port' - dt-bindings: vd56g3 is a video-interface-device type of device - dt-bindings: Follow rules and convention for bindings naming v1 -> v2: - driver: Drop VD56G3_NUM_SUPPLIES - driver: Rename 'ext_clock' to 'xclk_freq' - driver: Make use of 'container_of_const' instead of 'container_of' - driver: Drop usage of WARN() - driver: Move a few variables to unsigned int - driver: Add defines for the different Cut revisions - driver: Replace dev_warn() by dev_err() in situation we're returning errors - driver: Ensure sensor has dedicated 3.5ms to boot after reset - driver: Take into account return value of __v4l2_ctrl_modify_range() and __v4l2_ctrl_s_ctrl() functions - driver: Merge vd56g3_power_on() and vd56g3_boot() - dt-bindings: Lowercase power supply names - dt-bindings: Drop clock-lanes property - dt-bindings: Drop unecessary 'items' contraint for lane-polarities - dt-bindings: Drop unused labels Sylvain Petinot (2): media: dt-bindings: Add ST VD56G3 camera sensor media: i2c: Add driver for ST VD56G3 camera sensor .../bindings/media/i2c/st,vd56g3.yaml | 139 ++ MAINTAINERS | 9 + drivers/media/i2c/Kconfig | 11 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/vd56g3.c | 1599 +++++++++++++++++ 5 files changed, 1759 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml create mode 100644 drivers/media/i2c/vd56g3.c -- 2.17.1
