On Tue, 03 Sep 2024 11:36:25 +0200, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> > > This enables WLAN and Bluetooth on two boards using the sc8280xp SoC. > For the sc8280xp-crd we add the PMU, wifi and bluetooth nodes with the > correctly modelled wiring between them. For the X13s, we rework existing > nodes so that they align with the new DT bindings contract. > > v1 -> v2: > - fix commit message in patch 1/3 > - drop drive-strength from the wlan enable pin function > - drop the calibration variant property from the wifi node of the CRD > > Bartosz Golaszewski (2): > arm64: dts: qcom: sc8280xp-crd: enable bluetooth > arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855 > > Konrad Dybcio (1): > arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855 > > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 166 ++++++++++++++++++ > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 98 +++++++++-- > 2 files changed, 252 insertions(+), 12 deletions(-) > > -- > 2.43.0 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/sc8280xp-crd.dtb qcom/sc8280xp-lenovo-thinkpad-x13s.dtb' for 20240903093629.16242-1-brgl@xxxxxxxx: arch/arm64/boot/dts/qcom/sc8280xp-crd.dtb: wifi@0: 'vddrfa1p8-supply' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml# arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dtb: wifi@0: 'vddrfa1p8-supply' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml#
