This series add initial support for the Hardkernel ODROID-M2 board. The Hardkernel ODROID-M2 is a single-board computer based on Rockchip RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C. Schematics for ODROID-M2 can be found at: https://wiki.odroid.com/_media/odroid-m2/hardware/m2_main_rev1.0_240611.pdf The device tree was created based on the schematics with regulator voltage values adjusted to closer match vendor downstream device tree. Testing was done booting into Linux using mainline U-Boot from [1], a test build of mainline U-Boot for ODROID-M2 can be found at [2]. U-Boot patches will be sent once DT reach the devicetree-rebasing tree. [1] https://github.com/Kwiboo/u-boot-rockchip/commits/rk3xxx-2024.10/ [2] https://github.com/Kwiboo/u-boot-build/actions/runs/10653436524 Jonas Karlman (2): dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2 arm64: dts: rockchip: Add Hardkernel ODROID-M2 .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588s-odroid-m2.dts | 903 ++++++++++++++++++ 3 files changed, 909 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts -- 2.46.0
