On Mon, Mar 16, 2015 at 04:40:13PM -0700, Scott Branden wrote: > > On 15-03-16 04:37 PM, Brian Norris wrote: > >On Mon, Mar 16, 2015 at 04:07:51PM -0700, Scott Branden wrote: > >>On 15-03-06 05:18 PM, Brian Norris wrote: > >>>Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx> > >>>--- > >>> .../devicetree/bindings/mtd/brcmstb_nand.txt | 109 +++++++++++++++++++++ > >>> 1 file changed, 109 insertions(+) > >>> create mode 100644 Documentation/devicetree/bindings/mtd/brcmstb_nand.txt > >>> > >>>diff --git a/Documentation/devicetree/bindings/mtd/brcmstb_nand.txt b/Documentation/devicetree/bindings/mtd/brcmstb_nand.txt > >>>new file mode 100644 > >>>index 000000000000..933d44943cbb > >>>--- /dev/null > >> > >>Could you change the binding document with the vendor prefix to > >>match all the other drivers we have been submitting? ie. > >>"brcm,brcmnand.txt" > > > >$ find Documentation/devicetree/ -name 'broadcom*' > >Documentation/devicetree/bindings/net/broadcom-systemport.txt > >Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt > >Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt > >Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt > >Documentation/devicetree/bindings/net/broadcom-sf2.txt > > > >$ find Documentation/devicetree/ -name 'brcm[^,]*' > >Documentation/devicetree/bindings/arm/brcm-brcmstb.txt > > > >$ find Documentation/devicetree/ -name 'brcm,*' > >Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt > >Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt > >Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt > >Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt > >Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt > >Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt > >Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt > >Documentation/devicetree/bindings/rng/brcm,bcm2835.txt > >Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt > >Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt > >Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt > >Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt > >Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method > >Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt > >Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt > > > >$ find Documentation/devicetree/bindings -name '*.txt' | grep -v ','| wc -l > >1227 > >$ find Documentation/devicetree/bindings -name '*.txt' | grep ','| wc -l > >352 > > > >So, what's the standard? Company prefix? Long name? Commas? Hyphens? > > The problem with devicetree binding is there is no standard for much > of anything. Some others use the vendor prefix for all their > binding documentation. We can try to do the same? Ok, but we already have 3 versions for Broadcom. I can use 'brcm,' if that helps... Brian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
