Re: [PATCH 2/3] Documentation: devicetree: add binding doc for Broadcom NAND controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 15-03-16 04:37 PM, Brian Norris wrote:
On Mon, Mar 16, 2015 at 04:07:51PM -0700, Scott Branden wrote:
On 15-03-06 05:18 PM, Brian Norris wrote:
Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
---
  .../devicetree/bindings/mtd/brcmstb_nand.txt       | 109 +++++++++++++++++++++
  1 file changed, 109 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mtd/brcmstb_nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/brcmstb_nand.txt b/Documentation/devicetree/bindings/mtd/brcmstb_nand.txt
new file mode 100644
index 000000000000..933d44943cbb
--- /dev/null

Could you change the binding document with the vendor prefix to
match all the other drivers we have been submitting? ie.
"brcm,brcmnand.txt"

$ find Documentation/devicetree/ -name 'broadcom*'
Documentation/devicetree/bindings/net/broadcom-systemport.txt
Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt
Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
Documentation/devicetree/bindings/net/broadcom-sf2.txt

$ find Documentation/devicetree/ -name 'brcm[^,]*'
Documentation/devicetree/bindings/arm/brcm-brcmstb.txt

$ find Documentation/devicetree/ -name 'brcm,*'
Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt
Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method
Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt
Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt

$ find Documentation/devicetree/bindings -name '*.txt' | grep -v ','| wc -l
1227
$ find Documentation/devicetree/bindings -name '*.txt' | grep ','| wc -l
352

So, what's the standard? Company prefix? Long name? Commas? Hyphens?

The problem with devicetree binding is there is no standard for much of anything. Some others use the vendor prefix for all their binding documentation. We can try to do the same?


Brian


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux