> > + ti,mode:
> > + $ref: /schemas/types.yaml#/definitions/uint8
> > + description: |
> > + Operation mode
> > + Mode 0 - Manual mode. A channel is only sampled when the according input
> > + in the sysfs is read.
> > + Mode 1 - Auto mode. All channels are automatically sampled sequentially.
> > + Reading an input returns the last valid sample. In this mode further
> > + features like statistics and interrupts are available.
> > + default: 0
>
> I don't think this ti,mode property is suitable for bindings. sysfs is a
> linux implementation detail, when to do sampling is an implementation
> detail of your driver. Bindings are only supposed to describe properties
> of the hardware, not set software policy.
Agreed. With an IIO driver this will become a switch based on what usespace
interfaces are enabled.
So if events are on or buffered data capture, enable automode.
If just sysfs reads, then manual mode is fine.
> > +
> > + ads7138@10 {
>
> This should just be "dac@".
adc :)
>
> > + compatible = "ti,ads7138";
> > + reg = <0x10>;
> > + avdd-supply = <®_stb_3v3>;
> > + ti,mode = /bits/ 8 <1>;
> > + ti,interval = /bits/ 16 <1000>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
> > + status = "okay";
> > + };
> > + };
> oCheers,
> Conor.
