[PATCH V3 0/6] Enable IPQ5018 PCI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>

This patch series adds the relevant phy and controller
DT configurations for enabling PCI gen2 support
on IPQ5018.

v3:
  Added Reviewed-by tag for patch#1.
  Fixed dev_err_probe usage in patch#3.
  Added pinctrl/wak pins for pcie1 in patch#6.

v2:
  Fixed all review comments from Krzysztof, Robert Marko,
  Dmitry Baryshkov, Manivannan Sadhasivam, Konrad Dybcio.
  Updated the respective patches for their changes.

v1:
 https://lore.kernel.org/lkml/32389b66-48f3-8ee8-e2f1-1613feed3cc7@xxxxxxxxx/T/

Nitheesh Sekar (5):
  dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  dt-bindings: PCI: qcom: Add IPQ5108 SoC
  phy: qcom: Introduce PCIe UNIPHY 28LP driver
  arm64: dts: qcom: ipq5018: Add PCIe related nodes
  arm64: dts: qcom: ipq5018: Enable PCIe

Sricharan R (1):
  PCI: qcom: Add support for IPQ5018

 .../devicetree/bindings/pci/qcom,pcie.yaml    |  35 ++
 .../phy/qcom,ipq5018-uniphy-pcie.yaml         |  70 ++++
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts |  37 ++
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 168 ++++++++-
 drivers/pci/controller/dwc/pcie-qcom.c        |   1 +
 drivers/phy/qualcomm/Kconfig                  |  12 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c  | 346 ++++++++++++++++++
 8 files changed, 668 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5018-uniphy-pcie.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux