FriendlyELEC NanoPC-T6 has optional SPI flash chip on-board.
It is populated with 32MB one on LTS version.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
Reviewed-by: Jonas Karlman <jonas@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index d199f51a220c..77580c671b36 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -560,6 +560,21 @@ &sdmmc {
status = "okay";
};
+/* optional on non-LTS, populated on LTS version */
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim1_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
&spi2 {
status = "okay";
assigned-clocks = <&cru CLK_SPI2>;
--
2.46.0
