From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
The Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM board
and a 7" LVDS panel. Provide an overlay that enables the panel.
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
Note: This might throw the following warnings:
Warning (graph_port): /fragment@3: graph port node name should be 'port'
Warning (graph_endpoint): /fragment@3/__overlay__: graph endpoint node name should be 'endpoint'
Warning (graph_endpoint): /fragment@3/__overlay__: graph connection to node '/fragment@7/__overlay__/ports/port@0/endpoint' is not bidirectional
The following fix is available in DTC and queued in linux-next:
84b056a89d ("checks: relax graph checks for overlays")
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/commit/?id=84b056a89d3c5b6cf6c5eeeafd4c4b14d6333aa9
Changes for v2:
* Update copyright year
* Use exisitng MIPI DSI output port from imx8mm.dtsi
* Fix pinctrl for GPIO hogs
* Fix property order in i2c2 node
* Use generic node name for touchscreen
---
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../boot/dts/freescale/imx8mm-kontron-dl.dtso | 189 ++++++++++++++++++
2 files changed, 193 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f04c22b7de72e..d8af069139920 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -244,6 +244,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
+imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
new file mode 100644
index 0000000000000..2e40cc3852743
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+ compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ };
+
+ panel {
+ compatible = "jenson,bl-jt60050-01a", "panel-lvds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel>;
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ height-mm = <86>;
+ width-mm = <154>;
+
+ panel-timing {
+ clock-frequency = <51200000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hsync-len = <1>;
+ hfront-porch = <160>;
+ hback-porch = <160>;
+ vsync-len = <1>;
+ vfront-porch = <12>;
+ vback-porch = <23>;
+ };
+
+ port {
+ panel_out_bridge: endpoint {
+ remote-endpoint = <&bridge_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_mux_sel_hdmi {
+ status = "disabled";
+};
+
+&dsi_mux_sel_lvds {
+ status = "okay";
+};
+
+&mipi_dsi_out {
+ remote-endpoint = <&bridge_in_dsi_lvds>;
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3>;
+
+ panel-rst-hog {
+ gpio-hog;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-reset";
+ };
+
+ panel-stby-hog {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-standby";
+ };
+
+ panel-hinv-hog {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-horizontal-invert";
+ };
+
+ panel-vinv-hog {
+ gpio-hog;
+ gpios = <25 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "panel-vertical-invert";
+ };
+};
+
+&hdmi {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 8>;
+ reset-gpios = <&gpio3 23 0>;
+ irq-gpios = <&gpio3 22 0>;
+ };
+};
+
+&lvds {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in_dsi_lvds: endpoint {
+ remote-endpoint = <&dsi_out_bridge>;
+ data-lanes = <1 2>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_gpio3: gpio3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
+ MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
+ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6
+ >;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
+ MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
+ >;
+ };
+};
--
2.46.0
