On 27/08/2024 18:20, Jan Kiszka wrote: > On 27.08.24 17:33, Rob Herring wrote: >> On Mon, Aug 26, 2024 at 9:29 AM Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote: >>> >>> From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> >>> >>> To allow firmware to pick up all DTs from here, move the overlays that >>> are normally applied during DT fixup to the kernel source as well. Hook >>> then into the build nevertheless to ensure that regular checks are >>> performed. >>> >>> Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> >>> --- >>> arch/arm64/boot/dts/ti/Makefile | 2 + >>> ...48-iot2050-advanced-m2-bkey-ekey-pcie.dtso | 27 +++++++++++ >>> ...-am6548-iot2050-advanced-m2-bkey-usb3.dtso | 47 +++++++++++++++++++ >>> 3 files changed, 76 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso >>> create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso >>> >>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile >>> index e20b27ddf901..f459af7fac0d 100644 >>> --- a/arch/arm64/boot/dts/ti/Makefile >>> +++ b/arch/arm64/boot/dts/ti/Makefile >>> @@ -77,6 +77,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb >>> dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb >>> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb >>> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb >>> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtbo >>> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-usb3.dtbo >> >> You are missing applying these overlays to anything. That is a >> requirement for any overlay in the tree. > > You mean apply for testing purposes? How, technically? Apply as build a target combining base DTS and overlay. See all other overlays for technical aspect (just do the same). Best regards, Krzysztof
