On Mon, Aug 26, 2024 at 9:29 AM Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote: > > From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> > > To allow firmware to pick up all DTs from here, move the overlays that > are normally applied during DT fixup to the kernel source as well. Hook > then into the build nevertheless to ensure that regular checks are > performed. > > Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/ti/Makefile | 2 + > ...48-iot2050-advanced-m2-bkey-ekey-pcie.dtso | 27 +++++++++++ > ...-am6548-iot2050-advanced-m2-bkey-usb3.dtso | 47 +++++++++++++++++++ > 3 files changed, 76 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso > create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso > > diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile > index e20b27ddf901..f459af7fac0d 100644 > --- a/arch/arm64/boot/dts/ti/Makefile > +++ b/arch/arm64/boot/dts/ti/Makefile > @@ -77,6 +77,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb > +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtbo > +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-usb3.dtbo You are missing applying these overlays to anything. That is a requirement for any overlay in the tree. Rob
