This series enable WLAN/BT module on stm32mp1x discovery boards. Use LSCO from RTC to supply 32kHz clock to WLAN/BT modules. This is done by selecting "rtc_lsco_pins_a" in the WLAN pinctrl node. And also add RTC nodes on stm32mp25x to enable RTC on stm32mp257f-ev1 board. Christophe Roullier (2): ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2 ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk Valentin Caron (7): ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15 ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13 ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2 ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk arm64: dts: st: add RTC on stm32mp25x arm64: dts: st: enable RTC on stm32mp257f-ev1 board ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp25 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 7 +++ arch/arm/boot/dts/st/stm32mp135f-dk.dts | 52 +++++++++++++++++++ arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 7 +++ arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 51 +++++++++++++++++- arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 6 +++ arch/arm64/boot/dts/st/stm32mp251.dtsi | 10 ++++ arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 4 ++ 7 files changed, 136 insertions(+), 1 deletion(-) -- 2.25.1
