On stm32mp157c-dk2 board, WLAN/BT module LPO_IN pin is wired to
RTC OUT2_RMP pin.
Provide a pinctrl configuration to enable LSCO on OUT2_RMP.
Signed-off-by: Valentin Caron <valentin.caron@xxxxxxxxxxx>
---
arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 7a701f7ef0c70..8ac1233f9a02d 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -84,6 +84,16 @@ ltdc_ep1_out: endpoint@1 {
};
};
+&rtc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_rsvd_pins_a>;
+
+ rtc_lsco_pins_a: rtc-lsco-0 {
+ pins = "out2_rmp";
+ function = "lsco";
+ };
+};
+
&usart2 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&usart2_pins_c>;
--
2.25.1
