On Tue, 27 Aug 2024 11:48:15 +0300, Ciprian Costea wrote: > From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> > > Adding 100mhz & 200mhz pinmux support for uSDHC helps to support > higher speed modes for SD (SDR50, DDR50, SDR104) and > eMMC (such as HS200, HS400/HS400ES). > > Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/freescale/s32g2.dtsi | 153 ++++++++++++++++++ > .../arm64/boot/dts/freescale/s32g274a-evb.dts | 4 + > .../boot/dts/freescale/s32g274a-rdb2.dts | 4 + > arch/arm64/boot/dts/freescale/s32g3.dtsi | 153 ++++++++++++++++++ > .../boot/dts/freescale/s32g399a-rdb3.dts | 4 + > 5 files changed, 318 insertions(+) > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y freescale/s32g274a-evb.dtb freescale/s32g274a-rdb2.dtb freescale/s32g399a-rdb3.dtb' for 20240827084815.1931169-1-ciprianmarian.costea@xxxxxxxxxxx: arch/arm64/boot/dts/freescale/s32g274a-rdb2.dtb: pinctrl@4009c240: 'usdhc0-100mhzgrp', 'usdhc0-200mhzgrp', 'usdhc0grp' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml# arch/arm64/boot/dts/freescale/s32g274a-evb.dtb: pinctrl@4009c240: 'usdhc0-100mhzgrp', 'usdhc0-200mhzgrp', 'usdhc0grp' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml# arch/arm64/boot/dts/freescale/s32g399a-rdb3.dtb: pinctrl@4009c240: 'usdhc0-100mhzgrp', 'usdhc0-200mhzgrp', 'usdhc0grp' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
