From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx> This patch series adds the relevant phy and controller DT configurations for enabling PCI gen2 support on IPQ5018. v2: Fixed all review comments from Krzysztof, Robert Marko, Dmitry Baryshkov, Manivannan Sadhasivam, Konrad Dybcio. Updated the respective patches for their changes. v1: https://lore.kernel.org/lkml/32389b66-48f3-8ee8-e2f1-1613feed3cc7@xxxxxxxxx/T/ Nitheesh Sekar (5): dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy dt-bindings: PCI: qcom: Add IPQ5108 SoC phy: qcom: Introduce PCIe UNIPHY 28LP driver arm64: dts: qcom: ipq5018: Add PCIe related nodes arm64: dts: qcom: ipq5018: Enable PCIe Sricharan R (1): PCI: qcom: Add support for IPQ5018 .../devicetree/bindings/pci/qcom,pcie.yaml | 35 ++ .../phy/qcom,ipq5018-uniphy-pcie.yaml | 70 ++++ .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 166 ++++++++- drivers/pci/controller/dwc/pcie-qcom.c | 1 + drivers/phy/qualcomm/Kconfig | 12 + drivers/phy/qualcomm/Makefile | 1 + .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 341 ++++++++++++++++++ 8 files changed, 633 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5018-uniphy-pcie.yaml create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c -- 2.34.1
