On 12:04-20240822, Robert Nelson wrote: Minor nmits below: > BeagleBoard.org BeagleY-AI is an easy to use, affordable open source > hardware single board computer based on the Texas Instruments AM67A, > which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose > digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), > GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 > cores for low-power, low-latency GPIO control. > [...] > + > + vdd_3v3: regulator-2 { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vsys_5v0>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vdd_mmc1: regulator-mmc1 { Also responding: > Okay, i'll change these... I already see a problem, as I've got two > 3v3... can we use 'regulator-[0-9]v[0-9]-X' ? let us just call them regulator-3 and so on incrementally. You can already name with regulator-name property. We really don't need the "v' specification here. [...] > +&wkup_i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&wkup_i2c0_pins_default>; > + clock-frequency = <100000>; > + bootph-all; > + status = "okay"; > + > + tps65219: pmic@30 { > + compatible = "ti,tps65219"; > + reg = <0x30>; > + buck1-supply = <&vsys_5v0>; > + buck2-supply = <&vsys_5v0>; > + buck3-supply = <&vsys_5v0>; > + ldo1-supply = <&vdd_3v3>; > + ldo3-supply = <&vdd_3v3>; > + ldo4-supply = <&vdd_3v3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_irq_pins_default>; > + interrupt-parent = <&gic500>; > + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + system-power-controller; > + ti,power-button; > + bootph-all; Flip the bootph-all above the system-power-controller to stay within the coding style boundaries? > + > + regulators { [...] > +}; > + > +&sdhci1 { > + /* SD/MMC */ > + vmmc-supply = <&vdd_mmc1>; > + vqmmc-supply = <&vdd_sd_dv>; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_mmc1_pins_default>; > + disable-wp; > + cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; > + cd-debounce-delay-ms = <100>; > + ti,fails-without-test-cd; > + bootph-all; Nit: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n117 keep the bootph property above the vendor prefixed ones.. > + status = "okay"; > +}; > -- > 2.39.2 > Additionally, with dtbs_check on next-20240823, I get: /workdir/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected) /workdir/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dtb: leds: led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: Please fix appropriately. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D