On 21/08/2024 12:26, Marcin Juszkiewicz wrote: > This series updates FriendlyELEC NanoPC-T6 situation. There is non-LTS > (2301) version of a board and LTS (2310) version. > > This series creates separate DTS for NanoPC-T6 LTS (on top of non-LTS > one) and enables USB 2.0 ports on it. > > Then set of changes for both versions are done: > > - enable USB-C port (one orientation only) > - enable Mali GPU > - enable IR receiver (not tested) > - enable SPI flash (present on LTS, optional on non-LTS) > > Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx> > > --- > Changes in v3: > - create separate NanoPC-T6 LTS devicetree as suggested > - Link to v2: https://lore.kernel.org/r/20240821-friendlyelec-nanopc-t6-lts-v2-0-e0138bb10042@xxxxxxxxxx > > Changes in v2: > - merged changes into NanoPC-T6 dts file > - add SPI flash pinctl for SPI M1 > - enable SPI on NanoPC-T6 LTS > - enable USB-C port (one orientation only) > - enable Mali GPI > - enable IR receiver (not tested) > - Link to v1: https://lore.kernel.org/r/20240820-friendlyelec-nanopc-t6-lts-v1-1-da1273c3e08e@xxxxxxxxxxxxxxxxxx Please slow down with your postings. You posted v2 with obvious issues, so you had to post v3... One bigger patchset per 24h. Best regards, Krzysztof
