This series updates FriendlyELEC NanoPC-T6 situation. There is non-LTS (2301) version of a board and LTS (2310) version. This series creates separate DTS for NanoPC-T6 LTS (on top of non-LTS one) and enables USB 2.0 ports on it. Then set of changes for both versions are done: - enable USB-C port (one orientation only) - enable Mali GPU - enable IR receiver (not tested) - enable SPI flash (present on LTS, optional on non-LTS) Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx> --- Changes in v3: - create separate NanoPC-T6 LTS devicetree as suggested - Link to v2: https://lore.kernel.org/r/20240821-friendlyelec-nanopc-t6-lts-v2-0-e0138bb10042@xxxxxxxxxx Changes in v2: - merged changes into NanoPC-T6 dts file - add SPI flash pinctl for SPI M1 - enable SPI on NanoPC-T6 LTS - enable USB-C port (one orientation only) - enable Mali GPI - enable IR receiver (not tested) - Link to v1: https://lore.kernel.org/r/20240820-friendlyelec-nanopc-t6-lts-v1-1-da1273c3e08e@xxxxxxxxxxxxxxxxxx --- Marcin Juszkiewicz (7): dt-bindings: arm: rockchip: Add NanoPC-T6 LTS arm64: dts: rockchip: add NanoPC-T6 LTS arm64: dts: rockchip: define pinctl for SPI M1 arm64: dts: rockchip: add SPI flash on NanoPC-T6 arm64: dts: rockchip: add IR-receiver to NanoPC-T6 arm64: dts: rockchip: enable GPU on NanoPC-T6 arm64: dts: rockchip: enable USB-C on NanoPC-T6 .../devicetree/bindings/arm/rockchip.yaml | 6 +- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588-base-pinctrl.dtsi | 17 ++++ .../boot/dts/rockchip/rk3588-nanopc-t6-lts.dts | 61 ++++++++++++ arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts | 105 ++++++++++++++++++++- 5 files changed, 187 insertions(+), 3 deletions(-) --- base-commit: 6e4436539ae182dc86d57d13849862bcafaa4709 change-id: 20240820-friendlyelec-nanopc-t6-lts-00c7678c3bd7 Best regards, -- Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
