Usually the MDI pair order reversal configuration is defined by
bootstrap pin MDI_CFG. Some designs, however, require overriding the MDI
pair order and force either normal or reverse order.
Add properties 'marvell,force-mdi-order-normal' and
'marvell,force-mdi-order-reverse' for that purpose.
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/net/marvell,aquantia.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
index 9854fab4c4db0..c82d0be48741d 100644
--- a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
@@ -48,6 +48,16 @@ properties:
firmware-name:
description: specify the name of PHY firmware to load
+ marvell,force-mdi-order-normal:
+ type: boolean
+ description:
+ force normal order of MDI pairs, overriding MDI_CFG bootstrap pin.
+
+ marvell,force-mdi-order-reverse:
+ type: boolean
+ description:
+ force reverse order of MDI pairs, overriding MDI_CFG bootstrap pin.
+
nvmem-cells:
description: phandle to the firmware nvmem cell
maxItems: 1
--
2.46.0
