Hello Chukun,
On 2024-08-20 14:00, Chukun Pan wrote:
The SoM board has reserved HDMI output, while the Radxa E25
is not connected. So disable the display subsystem only for
Radxa E25.
Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
Looking good to me, thanks for the patch. The carrier board is what's
responsible for exposing the actual HDMI port from the SoM.
Reviewed-by: Dragan Simic <dsimic@xxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 4 ----
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 4 ++++
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
index 45b03dcbbad4..19d309654bdb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
@@ -108,10 +108,6 @@ &cpu3 {
cpu-supply = <&vdd_cpu>;
};
-&display_subsystem {
- status = "disabled";
-};
-
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
index 72ad74c38a2b..84a0789fad96 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
@@ -103,6 +103,10 @@ &combphy1 {
phy-supply = <&vcc3v3_pcie30x1>;
};
+&display_subsystem {
+ status = "disabled";
+};
+
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie20_reset_h>;
