The SoM board has reserved HDMI output, while the Radxa E25 is not connected. So disable the display subsystem only for Radxa E25. Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 4 ---- arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 4 ++++ 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi index 45b03dcbbad4..19d309654bdb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi @@ -108,10 +108,6 @@ &cpu3 { cpu-supply = <&vdd_cpu>; }; -&display_subsystem { - status = "disabled"; -}; - &gpu { mali-supply = <&vdd_gpu>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts index 72ad74c38a2b..84a0789fad96 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts @@ -103,6 +103,10 @@ &combphy1 { phy-supply = <&vcc3v3_pcie30x1>; }; +&display_subsystem { + status = "disabled"; +}; + &pcie2x1 { pinctrl-names = "default"; pinctrl-0 = <&pcie20_reset_h>; -- 2.25.1