Re: [PATCH v2 3/7] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/08/2024 23:50, Jan Petrous (OSS) wrote:
> Add basic description for DWMAC ethernet IP on NXP S32G2xx, S32G3xx
> and S32R45 automotive series SoCs.

Fix your email threading. b4 handle everything correctly, so start using it.

> 
> Signed-off-by: Jan Petrous (OSS) <jan.petrous@xxxxxxxxxxx>
> ---
>  .../bindings/net/nxp,s32cc-dwmac.yaml         | 127 ++++++++++++++++++
>  .../devicetree/bindings/net/snps,dwmac.yaml   |   1 +
>  2 files changed, 128 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml
> new file mode 100644
> index 000000000000..443ad918a9a5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nxp,s32cc-dwmac.yaml

Filename based on compatible, so what does "cc" stand for?

> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2021-2024 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nxp,s32cc-dwmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP S32G2xx/S32G3xx/S32R45 GMAC ethernet controller
> +
> +maintainers:
> +  - Jan Petrous (OSS) <jan.petrous@xxxxxxxxxxx>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  This device is a platform glue layer for stmmac.

Drop description of driver and instead describe the hardware.

> +  Please see snps,dwmac.yaml for the other unchanged properties.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,s32g2-dwmac
> +      - nxp,s32g3-dwmac
> +      - nxp,s32r45-dwmac
> +
> +  reg:
> +    items:
> +      - description: Main GMAC registers
> +      - description: GMAC PHY mode control register
> +
> +  interrupts:
> +    description: Common GMAC interrupt

No, instead maxItems: 1

> +
> +  interrupt-names:
> +    const: macirq
> +
> +  clocks:
> +    items:
> +      - description: Main GMAC clock
> +      - description: Transmit clock
> +      - description: Receive clock
> +      - description: PTP reference clock
> +
> +  clock-names:
> +    items:
> +      - const: stmmaceth
> +      - const: tx
> +      - const: rx
> +      - const: ptp_ref
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - phy-mode

Drop, snps,dwmac requires this.

> +
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/phy/phy.h>
> +    bus {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      ethernet@4033c000 {
> +        compatible = "nxp,s32cc-dwmac";
> +        reg = <0x0 0x4033c000 0x0 0x2000>, /* gmac IP */
> +              <0x0 0x4007c004 0x0 0x4>;    /* GMAC_0_CTRL_STS */
> +        interrupt-parent = <&gic>;
> +        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "macirq";
> +        snps,mtl-rx-config = <&mtl_rx_setup>;
> +        snps,mtl-tx-config = <&mtl_tx_setup>;
> +        clocks = <&clks 24>, <&clks 17>, <&clks 16>, <&clks 15>;
> +        clock-names = "stmmaceth", "tx", "rx", "ptp_ref";
> +        phy-mode = "rgmii-id";
> +        phy-handle = <&phy0>;
> +
> +        mtl_rx_setup: rx-queues-config {
> +          snps,rx-queues-to-use = <5>;
> +
> +          queue0 {
> +          };
> +          queue1 {
> +          };


Why listing empty nodes?

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux