Hi Krzk,
> > ---
> > arch/arm64/boot/dts/aspeed/Makefile | 4 ++
> > arch/arm64/boot/dts/aspeed/ast2700-evb.dts | 50
> ++++++++++++++++++++++
> > 2 files changed, 54 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/aspeed/Makefile
> > create mode 100644 arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> >
> > diff --git a/arch/arm64/boot/dts/aspeed/Makefile
> b/arch/arm64/boot/dts/aspeed/Makefile
> > new file mode 100644
> > index 000000000000..ffe7e15017cc
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/aspeed/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +dtb-$(CONFIG_ARCH_ASPEED) += \
> > + ast2700-evb.dtb
> > diff --git a/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> > new file mode 100644
> > index 000000000000..187c458e566b
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> > @@ -0,0 +1,50 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +/dts-v1/;
> > +
> > +#include "aspeed-g7.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +
> > +/ {
> > + model = "AST2700A1-EVB";
> > + compatible = "aspeed,ast2700a1-evb", "aspeed,ast2700";
>
> You have never tested this.
>
> Sorry, test your DTS first.
Agree. I will test my dts by make dtbs_check W=1
>
> > +
> > + chosen {
> > + bootargs = "console=ttyS12,115200n8";
>
> Drop.
Agree.
>
> > + stdout-path = &uart12;
> > + };
> > +
> > + firmware {
> > + optee: optee {
> > + compatible = "linaro,optee-tz";
> > + method = "smc";
> > + };
> > + };
> > +
> > + memory@400000000 {
> > + device_type = "memory";
> > + reg = <0x4 0x00000000 0x0 0x40000000>;
> > + };
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + mcu_fw: mcu-firmware@42fe00000 {
> > + reg = <0x4 0x2fe00000 0x0 0x200000>;
> > + no-map;
> > + };
> > +
> > + atf: trusted-firmware-a@430000000 {
> > + reg = <0x4 0x30000000 0x0 0x80000>;
> > + no-map;
> > + };
> > +
> > + optee_core: optee_core@430080000 {
>
> Read DTS coding style.
Agree. Should I change to optee_core: optee-core@430080000 {
>
> > + reg = <0x4 0x30080000 0x0 0x1000000>;
> > + no-map;
> > + };
> > + };
> > +};
> > +
>
> Remove stray blank line.
Agree.
>
> Best regards,
> Krzysztof
--
Best Regards,
Kevin.Chen
************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊，並受法律保護。如 台端非指定之收件者，請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
