Hi Krzk,
I will separate clock part in the v3 patch into Ryan's clock series.
>
> So you did not write commit msgs to none of the commits?
>
> > ---
> > drivers/clk/Makefile | 1 +
> > drivers/clk/clk-ast2700.c | 1166
> > +++++++++++++++++++++++++++++++++++++
> > 2 files changed, 1167 insertions(+)
> > create mode 100644 drivers/clk/clk-ast2700.c
> >
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > f793a16cad40..0d5992ea0fa4 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
> > obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
> > obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
> > obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
> > +obj-$(CONFIG_MACH_ASPEED_G7) += clk-ast2700.o
>
> ...
>
> > +
> > +static const char *const pspclk_sel[] = {
> > + "soc0-mpll",
> > + "soc0-hpll",
> > +};
> > +
> > +static const char *const soc0_uartclk_sel[] = {
> > + "soc0-clk24Mhz",
> > + "soc0-clk192Mhz",
> > +};
> > +
> > +static const char *const emmcclk_sel[] = {
> > + "soc0-mpll_div4",
> > + "soc0-hpll_div4",
> > +};
> > +
> > +static int ast2700_soc0_clk_init(struct device_node *soc0_node) {
> > + struct clk_hw_onecell_data *clk_data;
> > + void __iomem *clk_base;
> > + struct ast2700_reset *reset;
> > + struct clk_hw **clks;
> > + int div;
> > + u32 val;
> > + int ret;
> > +
> > + clk_data = kzalloc(struct_size(clk_data, hws, SOC0_NUM_CLKS),
> GFP_KERNEL);
> > + if (!clk_data)
> > + return -ENOMEM;
> > +
> > + clk_data->num = SOC0_NUM_CLKS;
> > + clks = clk_data->hws;
> > +
> > + clk_base = of_iomap(soc0_node, 0);
> > + if (WARN_ON(IS_ERR(clk_base)))
>
> Drop WARN_ON
I remind Ryan for this fix. He will reply in these series.
https://patchwork.kernel.org/project/linux-clk/patch/20240808075937.2756733-5-ryan_chen@xxxxxxxxxxxxxx/
>
> > + return PTR_ERR(clk_base);
> > +
> > + reset = kzalloc(sizeof(*reset), GFP_KERNEL);
> > + if (!reset)
> > + return -ENOMEM;
> > +
> > + reset->base = clk_base;
> > +
> > + reset->rcdev.owner = THIS_MODULE;
> > + reset->rcdev.nr_resets = SOC0_RESET_NUMS;
> > + reset->rcdev.ops = &ast2700_reset_ops;
> > + reset->rcdev.of_node = soc0_node;
> > +
> > + ret = reset_controller_register(&reset->rcdev);
> > + if (ret) {
> > + pr_err("soc0 failed to register reset controller\n");
> > + return ret;
> > + }
> > +
> > + //refclk
>
> Weird comment. Please read Coding Style.
I remind Ryan for this fix. He will reply in these series.
https://patchwork.kernel.org/project/linux-clk/patch/20240808075937.2756733-5-ryan_chen@xxxxxxxxxxxxxx/
>
>
> > + clks[SCU0_CLKIN] =
> > + clk_hw_register_fixed_rate(NULL, "soc0-clkin", NULL, 0,
> > +SCU_CLK_25MHZ);
> > +
> > + clks[SCU0_CLK_24M] =
> > + clk_hw_register_fixed_rate(NULL, "soc0-clk24Mhz", NULL, 0,
> > +SCU_CLK_24MHZ);
> > +
> > + clks[SCU0_CLK_192M] =
> > + clk_hw_register_fixed_rate(NULL, "soc0-clk192Mhz", NULL, 0,
> > +SCU_CLK_192MHZ);
> > +
> > + //hpll
> > + val = readl(clk_base + SCU0_HWSTRAP1);
> > + if ((val & GENMASK(3, 2)) != 0) {
> > + switch ((val & GENMASK(3, 2)) >> 2) {
> > + case 1:
> > + clks[SCU0_CLK_HPLL] =
> > + clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0,
> 1900000000);
> > + break;
> > + case 2:
> > + clks[SCU0_CLK_HPLL] =
> > + clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0,
> 1800000000);
> > + break;
> > + case 3:
> > + clks[SCU0_CLK_HPLL] =
> > + clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0,
> 1700000000);
> > + break;
> > + }
> > + } else {
> > + val = readl(clk_base + SCU0_HPLL_PARAM);
> > + clks[SCU0_CLK_HPLL] = ast2700_soc0_hw_pll("soc0-hpll",
> "soc0-clkin", val);
> > + }
> > + clks[SCU0_CLK_HPLL_DIV2] = clk_hw_register_fixed_factor(NULL,
> "soc0-hpll_div2", "soc0-hpll", 0, 1, 2);
> > + clks[SCU0_CLK_HPLL_DIV4] = clk_hw_register_fixed_factor(NULL,
> > +"soc0-hpll_div4", "soc0-hpll", 0, 1, 4);
> > +
> > + //dpll
>
>
>
> Best regards,
> Krzysztof
--
Best Regards,
Kevin.Chen
************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊，並受法律保護。如 台端非指定之收件者，請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
