On Thu, 15 Aug 2024 12:36:40 +0200, Marcus Glocker wrote: > This DTS adds initial support for the Samsung Galaxy Book4 Edge laptop. > Keyboard, Touch-pad, and UFS are working. The Touch-screen needs further > investigation, and is therefore disabled for now. > > Changed from v2: > - Squash Makefile patch to new DTS file patch. > > Changed from v1: > - Provide the patch in the expected format. > - Added missing bindings. > - Removed sound node. > - Changed regulator syntax to be consistent. > - Changed touchscreen node comment, and removed false pin definition. > - Rename ufshc@ to ufs@. > > Marcus Glocker (6): > dt-bindings: crypto: Add X1E80100 Crypto Engine > dt-bindings: phy: Add X1E80100 UFS > dt-bindings: ufs: Add X1E80100 UFS > arm64: dts: qcom: Add UFS node > dt-bindings: arm: Add Samsung Galaxy Book4 Edge > arm64: dts: qcom: Add Samsung Galaxy Book4 Edge DTS > > .../devicetree/bindings/arm/qcom.yaml | 1 + > .../crypto/qcom,inline-crypto-engine.yaml | 1 + > .../phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 2 + > .../devicetree/bindings/ufs/qcom,ufs.yaml | 2 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../x1e80100-samsung-galaxy-book4-edge.dts | 959 ++++++++++++++++++ > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 71 ++ > 7 files changed, 1037 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge.dts > > -- > 2.39.2 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/x1e80100-samsung-galaxy-book4-edge.dtb' for v2iah5yrne4u6uzrnzg36tvtxzqrpiez6io2gyyfrht2x42umw@5ribqndiavxv: arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge.dtb: domain-idle-states: cluster-sleep-0: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml# arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge.dtb: domain-idle-states: cluster-sleep-1: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml# arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge.dtb: phy@1d87000: clocks: [[2, 0], [52, 242]] is too short from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-ufs-phy.yaml# arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge.dtb: phy@1d87000: 'vdda-phy-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-ufs-phy.yaml# arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge.dtb: usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
