On Thu, Aug 15, 2024 at 12:01:36PM +0200, Stanislav Jakubek wrote: > The SC27XX fuel gauge supports a low voltage alarm IRQ, which is used > for more accurate battery capacity measurements with lower voltages. > > This was unfortunately never documented in bindings, do so now. > > Signed-off-by: Stanislav Jakubek <stano.jakubek@xxxxxxxxx> > --- > Initial Linux driver submission adding this feature: > https://lore.kernel.org/lkml/ee1dd39f126bd03fb88381de9663d32df994d341.1542185618.git.baolin.wang@xxxxxxxxxx/ > > The only in-tree user (sc2731.dtsi) has had interrupts specified since its > initial fuel-gauge submission: > https://lore.kernel.org/lkml/4f66af3b47ba241380f8092e08879aca6d7c35b3.1548052878.git.baolin.wang@xxxxxxxxxx/ This context could go into the commit message I think, as justification for making the interrupt required. Also, this binding is odd in that it has several compatibles in an enum, but the driver (added at the same time) only has one compatible in it. Are you using the sc2731 in your device? > > .../devicetree/bindings/power/supply/sc27xx-fg.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml > index de43e45a43b7..9108a2841caf 100644 > --- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml > +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml > @@ -27,6 +27,9 @@ properties: > battery-detect-gpios: > maxItems: 1 > > + interrupts: > + maxItems: 1 > + > io-channels: > items: > - description: Battery Temperature ADC > @@ -53,6 +56,7 @@ required: > - compatible > - reg > - battery-detect-gpios > + - interrupts > - io-channels > - io-channel-names > - nvmem-cells > @@ -88,6 +92,8 @@ examples: > compatible = "sprd,sc2731-fgu"; > reg = <0xa00>; > battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; > + interrupt-parent = <&sc2731_pmic>; > + interrupts = <4>; > io-channels = <&pmic_adc 5>, <&pmic_adc 14>; > io-channel-names = "bat-temp", "charge-vol"; > nvmem-cells = <&fgu_calib>; > -- > 2.34.1 >
Attachment:
signature.asc
Description: PGP signature
