Re: [PATCH 13/13] media: qcom: camss: Add support for VFE hardware version Titan 780

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/08/2024 15:41, Depeng Shao wrote:
Add support for VFE found on SM8550 (Titan 780). This implementation is
based on the titan 480 implementation. It supports the normal and lite
VFE.

Co-developed-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Depeng Shao <quic_depengs@xxxxxxxxxxx>
---
  drivers/media/platform/qcom/camss/Makefile    |   1 +
  .../media/platform/qcom/camss/camss-vfe-780.c | 148 ++++++++++++++++++
  drivers/media/platform/qcom/camss/camss-vfe.c |  33 ++--
  drivers/media/platform/qcom/camss/camss-vfe.h |   1 +
  drivers/media/platform/qcom/camss/camss.c     | 132 ++++++++++++++++
  drivers/media/platform/qcom/camss/camss.h     |   2 +
  6 files changed, 304 insertions(+), 13 deletions(-)
  create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-780.c

diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index c336e4c1a399..a83b7a8dcef7 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -17,6 +17,7 @@ qcom-camss-objs += \
  		camss-vfe-4-8.o \
  		camss-vfe-17x.o \
  		camss-vfe-480.o \
+		camss-vfe-780.o \
  		camss-vfe-gen1.o \
  		camss-vfe.o \
  		camss-video.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-780.c b/drivers/media/platform/qcom/camss/camss-vfe-780.c
new file mode 100644
index 000000000000..e1c4d25cdc40
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-780.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-780.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v780 (SM8550)
+ *
+ * Copyright (c) 2024 Qualcomm Technologies, Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+
+#define BUS_REG_BASE			(vfe_is_lite(vfe) ? 0x200 : 0xC00)
+
+#define VFE_BUS_WM_CGC_OVERRIDE		(BUS_REG_BASE + 0x08)
+#define		WM_CGC_OVERRIDE_ALL		(0x7FFFFFF)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL	(BUS_REG_BASE + 0xDC)
+
+#define VFE_BUS_WM_CFG(n)		(BUS_REG_BASE + 0x200 + (n) * 0x100)
+#define		WM_CFG_EN			BIT(0)
+#define		WM_VIR_FRM_EN			BIT(1)
+#define		WM_CFG_MODE			BIT(16)
+#define VFE_BUS_WM_IMAGE_ADDR(n)	(BUS_REG_BASE + 0x204 + (n) * 0x100)
+#define VFE_BUS_WM_FRAME_INCR(n)	(BUS_REG_BASE + 0x208 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_0(n)	(BUS_REG_BASE + 0x20c + (n) * 0x100)
+#define		WM_IMAGE_CFG_0_DEFAULT_WIDTH	(0xFFFF)
+#define VFE_BUS_WM_IMAGE_CFG_1(n)	(BUS_REG_BASE + 0x210 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_2(n)	(BUS_REG_BASE + 0x214 + (n) * 0x100)
+#define		WM_IMAGE_CFG_2_DEFAULT_STRIDE	(0xFFFF)
+#define VFE_BUS_WM_PACKER_CFG(n)	(BUS_REG_BASE + 0x218 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_ADDR(n)	(BUS_REG_BASE + 0x220 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_INCR(n)	(BUS_REG_BASE + 0x224 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_CFG(n)	(BUS_REG_BASE + 0x228 + (n) * 0x100)
+
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)	(BUS_REG_BASE + 0x230 + (n) * 0x100)
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)	(BUS_REG_BASE + 0x234 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)		(BUS_REG_BASE + 0x238 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)		(BUS_REG_BASE + 0x23c + (n) * 0x100)
+
+#define VFE_BUS_WM_MMU_PREFETCH_CFG(n)		(BUS_REG_BASE + 0x260 + (n) * 0x100)
+#define VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(n)	(BUS_REG_BASE + 0x264 + (n) * 0x100)
+#define VFE_BUS_WM_SYSTEM_CACHE_CFG(n)		(BUS_REG_BASE + 0x268 + (n) * 0x100)
+
+/* for titan 780, each bus client is hardcoded to a specific path */
+#define RDI_WM(n)			((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
+
+static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
+{
+	struct v4l2_pix_format_mplane *pix =
+		&line->video_out.active_fmt.fmt.pix_mp;
+
+	wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
+
+	/* no clock gating at bus input */
+	writel(WM_CGC_OVERRIDE_ALL, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
+
+	writel(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
+
+	writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
+	       vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+	writel((WM_IMAGE_CFG_0_DEFAULT_WIDTH & 0xFFFF),
+	       vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
+	writel(WM_IMAGE_CFG_2_DEFAULT_STRIDE,
+	       vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
+	writel(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
+
+	/* no dropped frames, one irq per frame */
+	writel(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
+	writel(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
+	writel(0, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(wm));
+	writel(1, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(wm));
+
+	writel(1, vfe->base + VFE_BUS_WM_MMU_PREFETCH_CFG(wm));
+	writel(0xFFFFFFFF, vfe->base + VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(wm));
+
+	writel(WM_CFG_EN | WM_CFG_MODE, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
+{
+	wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
+	writel(0, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
+			  struct vfe_line *line)
+{
+	wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
+	writel((addr >> 8) & 0xFFFFFFFF, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+
+	dev_dbg(vfe->camss->dev, "%s wm:%d, image buf addr:0x%x\n",
+		__func__, wm, addr);
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+	int port_id = line_id;
+
+	/* RUP(register update) registers has beem moved to CSID in Titan 780.
+	 * Notify the event of trigger RUP.
+	 */
+	camss_reg_update(vfe->camss, vfe->id, port_id, false);
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+					enum vfe_line_id line_id)
+{
+	int port_id = line_id;
+
+	/* RUP(register update) registers has beem moved to CSID in Titan 780.
+	 * Notify the event of trigger RUP clear.
+	 */
+	camss_reg_update(vfe->camss, vfe->id, port_id, true);
+}
+
+static const struct camss_video_ops vfe_video_ops_780 = {
+	.queue_buffer = vfe_queue_buffer_v2,
+	.flush_buffers = vfe_flush_buffers,
+};
+
+static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
+{
+	vfe->video_ops = vfe_video_ops_780;
+}
+
+const struct vfe_hw_ops vfe_ops_780 = {
+	.enable_irq = NULL,
+	.global_reset = NULL,
+	.hw_version = vfe_hw_version,
+	.isr = NULL,
+	.pm_domain_off = vfe_pm_domain_off,
+	.pm_domain_on = vfe_pm_domain_on,
+	.subdev_init = vfe_subdev_init,
+	.vfe_disable = vfe_disable,
+	.vfe_enable = vfe_enable_v2,
+	.vfe_halt = NULL,
+	.vfe_wm_start = vfe_wm_start,
+	.vfe_wm_stop = vfe_wm_stop,
+	.vfe_buf_done = vfe_buf_done,
+	.vfe_wm_update = vfe_wm_update,
+	.reg_update = vfe_reg_update,
+	.reg_update_clear = vfe_reg_update_clear,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 71bd55e854bb..507fc7785ac8 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -343,6 +343,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
  	case CAMSS_845:
  	case CAMSS_8250:
  	case CAMSS_8280XP:
+	case CAMSS_8550:
  		switch (sink_code) {
  		case MEDIA_BUS_FMT_YUYV8_1X16:
  		{
@@ -674,15 +675,17 @@ int vfe_reset(struct vfe_device *vfe)
  {
  	unsigned long time;
- reinit_completion(&vfe->reset_complete);
+	if (vfe->res->hw_ops->global_reset) {
+		reinit_completion(&vfe->reset_complete);
- vfe->res->hw_ops->global_reset(vfe);
+		vfe->res->hw_ops->global_reset(vfe);
- time = wait_for_completion_timeout(&vfe->reset_complete,
-		msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
-	if (!time) {
-		dev_err(vfe->camss->dev, "VFE reset timeout\n");
-		return -EIO;
+		time = wait_for_completion_timeout(&vfe->reset_complete,
+			msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
+		if (!time) {
+			dev_err(vfe->camss->dev, "VFE reset timeout\n");
+			return -EIO;
+		}

Per my comment on the CSID - this feels like a fix you are introducing here in the guise of a silicon add.

Please break it up.

If you have a number of fixes to core functionality they need to be

1. Granular and individual
2. Indivdually scrutable with their own patch and descritption
3. git cherry-pickable
4. Have a Fixes tag
5. And be cc'd to stable@xxxxxxxxxxxxxxx

Can't accept either the fixes or the silicon add if the two live mixed up in one patch.

  	}
return 0;
@@ -1120,7 +1123,8 @@ void vfe_put(struct vfe_device *vfe)
  	} else if (vfe->power_count == 1) {
  		if (vfe->was_streaming) {
  			vfe->was_streaming = 0;
-			vfe->res->hw_ops->vfe_halt(vfe);
+			if (vfe->res->hw_ops->vfe_halt)
+				vfe->res->hw_ops->vfe_halt(vfe);

Similar comment.

  		}
  		camss_disable_clocks(vfe->nclocks, vfe->clock);
  		pm_runtime_put_sync(vfe->camss->dev);
@@ -1807,11 +1811,13 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
  	vfe->irq = ret;
  	snprintf(vfe->irq_name, sizeof(vfe->irq_name), "%s_%s%d",
  		 dev_name(dev), MSM_VFE_NAME, id);
-	ret = devm_request_irq(dev, vfe->irq, vfe->res->hw_ops->isr,
-			       IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
-	if (ret < 0) {
-		dev_err(dev, "request_irq failed: %d\n", ret);
-		return ret;
+	if (vfe->res->hw_ops->isr) {

And again.

+		ret = devm_request_irq(dev, vfe->irq, vfe->res->hw_ops->isr,
+				       IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
+		if (ret < 0) {
+			dev_err(dev, "request_irq failed: %d\n", ret);
+			return ret;
+		}
  	}
/* Clocks */
@@ -1963,6 +1969,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
  	case CAMSS_845:
  	case CAMSS_8250:
  	case CAMSS_8280XP:
+	case CAMSS_8550:
  		ret = 16;
  		break;
  	default:
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index fcbf4f609129..9dec5bc0d1b1 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -243,6 +243,7 @@ extern const struct vfe_hw_ops vfe_ops_4_7;
  extern const struct vfe_hw_ops vfe_ops_4_8;
  extern const struct vfe_hw_ops vfe_ops_170;
  extern const struct vfe_hw_ops vfe_ops_480;
+extern const struct vfe_hw_ops vfe_ops_780;
int vfe_get(struct vfe_device *vfe);
  void vfe_put(struct vfe_device *vfe);
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 7ee102948dc4..92a0fa02e415 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1666,6 +1666,125 @@ static const struct camss_subdev_resources csid_res_8550[] = {
  	}
  };
+static const struct camss_subdev_resources vfe_res_8550[] = {
+	/* VFE0 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe0_fast_ahb",
+			   "vfe0", "cpas_vfe0", "camnoc_axi" },

Should the camnoc AXI clock go here or in the CSID ?


+		.clock_rate = { { 0, 0, 0, 0, 0 },
+				{ 0, 0, 0, 0, 80000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 466000000, 594000000, 675000000, 785000000, 785000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
+		.reg = { "vfe0" },
+		.interrupt = { "vfe0" },
+		.vfe = {
+			.line_num = 3,
+			.is_lite = false,
+			.has_pd = true,
+			.pd_name = "ife0",
+			.hw_ops = &vfe_ops_780,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+	/* VFE1 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe1_fast_ahb",
+			   "vfe1", "cpas_vfe1", "camnoc_axi" },
+		.clock_rate = {	{ 0, 0, 0, 0, 0 },
+				{ 0, 0, 0, 0, 80000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 466000000, 594000000, 675000000, 785000000, 785000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
+		.reg = { "vfe1" },
+		.interrupt = { "vfe1" },
+		.vfe = {
+			.line_num = 3,
+			.is_lite = false,
+			.has_pd = true,
+			.pd_name = "ife1",
+			.hw_ops = &vfe_ops_780,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+	/* VFE2 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe2_fast_ahb",
+			   "vfe2", "cpas_vfe2", "camnoc_axi" },
+		.clock_rate = {	{ 0, 0, 0, 0, 0 },
+				{ 0, 0, 0, 0, 80000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 466000000, 594000000, 675000000, 785000000, 785000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
+		.reg = { "vfe2" },
+		.interrupt = { "vfe2" },
+		.vfe = {
+			.line_num = 3,
+			.is_lite = false,
+			.has_pd = true,
+			.pd_name = "ife2",
+			.hw_ops = &vfe_ops_780,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+	/* VFE3 lite */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
+			   "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
+		.clock_rate = {	{ 0, 0, 0, 0, 0 },
+				{ 0, 0, 0, 0, 80000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 400000000, 480000000, 480000000, 480000000, 480000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
+		.reg = { "vfe_lite0" },
+		.interrupt = { "vfe_lite0" },
+		.vfe = {
+			.line_num = 4,
+			.is_lite = true,
+			.hw_ops = &vfe_ops_780,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+	/* VFE4 lite */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
+			   "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
+		.clock_rate = {	{ 0, 0, 0, 0, 0 },
+				{ 0, 0, 0, 0, 80000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },

I realise you're specifying all of the operating points here but the clock only needs to appear once i.e.

1 x 300 MHz
1 x 400 MHz
1 x 480 MHz

etc.

+				{ 400000000, 480000000, 480000000, 480000000, 480000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 },
+				{ 300000000, 300000000, 400000000, 400000000, 400000000 } },
+		.reg = { "vfe_lite1" },
+		.interrupt = { "vfe_lite1" },
+		.vfe = {
+			.line_num = 4,
+			.is_lite = true,
+			.hw_ops = &vfe_ops_780,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+};
+
  static const struct resources_icc icc_res_sm8550[] = {
  	{
  		.name = "ahb",
@@ -1846,6 +1965,17 @@ void camss_pm_domain_off(struct camss *camss, int id)
  	}
  }
+void camss_reg_update(struct camss *camss, int hw_id, int port_id, bool is_clear)
+{
+	struct csid_device *csid;
+
+	if (hw_id < camss->res->csid_num) {

Does this cause do anything ? Is it just defensive programming ? Can the hw_id index exceed the number of CSIDs defined and if so why ?

Smells wrong.

+		csid = &(camss->csid[hw_id]);
+
+		csid->res->hw_ops->reg_update(csid, port_id, is_clear);
+	}
+}
+
  void camss_buf_done(struct camss *camss, int hw_id, int port_id)
  {
  	struct vfe_device *vfe;
@@ -2668,10 +2798,12 @@ static const struct camss_resources sm8550_resources = {
  	.pd_name = "top",
  	.csiphy_res = csiphy_res_8550,
  	.csid_res = csid_res_8550,
+	.vfe_res = vfe_res_8550,
  	.icc_res = icc_res_sm8550,
  	.icc_path_num = ARRAY_SIZE(icc_res_sm8550),
  	.csiphy_num = ARRAY_SIZE(csiphy_res_8550),
  	.csid_num = ARRAY_SIZE(csid_res_8550),
+	.vfe_num = ARRAY_SIZE(vfe_res_8550),
  	.link_entities = camss_link_entities
  };
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index d6b6558a82b9..697846e70e78 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -157,5 +157,7 @@ int camss_vfe_get(struct camss *camss, int id);
  void camss_vfe_put(struct camss *camss, int id);
  void camss_delete(struct camss *camss);
  void camss_buf_done(struct camss *camss, int hw_id, int port_id);
+void camss_reg_update(struct camss *camss, int hw_id,
+		      int port_id, bool is_clear);
#endif /* QC_MSM_CAMSS_H */

All in all good work, looks like good progress and thanks for sticking with your submissions.

Please follow up on the points raised.

---
bod





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux