From: Yashwanth Varakala <y.varakala@xxxxxxxxx>
Add fixed regulator VCC_5V_SW based on the phyBOARD-Pollux schematics
to reflect the connectivity on the phyBOARD-Pollux-i.MX8MP.
Signed-off-by: Yashwanth Varakala <y.varakala@xxxxxxxxx>
Signed-off-by: Teresa Remmet <t.remmet@xxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 4cdb3b9fff08..62f1819bc1a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -43,6 +43,15 @@ panel1_in: endpoint {
};
};
+ reg_vcc_5v_sw: regulator-vcc-5v-sw {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "VCC_5V_SW";
+ };
+
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
--
2.25.1
