Re: [PATCH v2 6/7] usb: dwc3: qcom: Transition to flattened model

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Aug 11, 2024 at 08:12:03PM -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
>
> The USB IP-block found in most Qualcomm platforms is modelled in the
> Linux kernel as 3 different independent device drivers, but as shown by
> the already existing layering violations in the Qualcomm glue driver
> they can not be operated independently.
>
> With the current implementation, the glue driver registers the core and
> has no way to know when this is done. As a result, e.g. the suspend
> callbacks needs to guard against NULL pointer dereferences when trying
> to peek into the struct dwc3 found in the drvdata of the child.
> Even with these checks, there are no way to fully protect ourselves from
> the race conditions that occur if the DWC3 is unbound.
>
> Missing from the upstream Qualcomm USB support is handling of role
> switching, in which the glue needs to be notified upon DRD mode changes.
> Several attempts has been made through the years to register callbacks
> etc, but they always fall short when it comes to handling of the core's
> probe deferral on resources etc.
>
> Moving to a model where the DWC3 core is instantiated in a synchronous
> fashion avoids above described race conditions.
>
> It is however not feasible to do so without also flattening the
> DeviceTree binding, as assumptions are made in the DWC3 core and
> frameworks used that the device's associated of_node will the that of
> the core. Furthermore, the DeviceTree binding is a direct
> representation of the Linux driver model, and doesn't necessarily
> describe "the USB IP-block".
>
> The Qualcomm DWC3 glue driver is therefor transitioned to initialize and
> operate the DWC3 within the one device context, in synchronous fashion.
>
> To handle backwards compatibility, and to remove the two-device model,
> of_nodes of the old compatible are converted to the new one, early
> during probe.
>
> This happens in the event that a DWC3 core child node is present, the
> content of the reg and interrupt properties of this node are merged into
> the shared properties, all remaining properties are copied and the core
> node is dropped. Effectively transitioning the node from qcom,dwc3 to
> qcom,snps-dwc3.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 310 +++++++++++++++++++++++++++++++++++--------
>  1 file changed, 251 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 33de03f2d782..27b5013cd411 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -6,6 +6,7 @@
>
>  #include <linux/io.h>
>  #include <linux/of.h>
> +#include <linux/cleanup.h>
>  #include <linux/clk.h>
>  #include <linux/irq.h>
>  #include <linux/of_clk.h>
> @@ -13,6 +14,8 @@
>  #include <linux/kernel.h>
>  #include <linux/extcon.h>
>  #include <linux/interconnect.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/phy.h>
> @@ -22,6 +25,7 @@
>  #include <linux/usb/hcd.h>
>  #include <linux/usb.h>
>  #include "core.h"
> +#include "glue.h"
>
>  /* USB QSCRATCH Hardware registers */
>  #define QSCRATCH_HS_PHY_CTRL			0x10
> @@ -72,7 +76,7 @@ struct dwc3_qcom_port {
>  struct dwc3_qcom {
>  	struct device		*dev;
>  	void __iomem		*qscratch_base;
> -	struct platform_device	*dwc3;
> +	struct dwc3		*dwc;
>  	struct clk		**clks;
>  	int			num_clocks;
>  	struct reset_control	*resets;
> @@ -259,7 +263,7 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
>  		goto put_path_ddr;
>  	}
>
> -	max_speed = usb_get_maximum_speed(&qcom->dwc3->dev);
> +	max_speed = usb_get_maximum_speed(qcom->dwc->dev);
>  	if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) {
>  		ret = icc_set_bw(qcom->icc_path_ddr,
>  				USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
> @@ -302,25 +306,16 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
>  /* Only usable in contexts where the role can not change. */
>  static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
>  {
> -	struct dwc3 *dwc;
> -
> -	/*
> -	 * FIXME: Fix this layering violation.
> -	 */
> -	dwc = platform_get_drvdata(qcom->dwc3);
> -
> -	/* Core driver may not have probed yet. */
> -	if (!dwc)
> -		return false;
> +	struct dwc3 *dwc = qcom->dwc;
>
>  	return dwc->xhci;

dwc only use once.

	return qcom->dwc->xhci?

>  }
>
>  static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index)
>  {
> -	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
>  	struct usb_device *udev;
>  	struct usb_hcd __maybe_unused *hcd;
> +	struct dwc3 *dwc = qcom->dwc;
>
>  	/*
>  	 * FIXME: Fix this layering violation.
> @@ -497,7 +492,7 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
>  static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data)
>  {
>  	struct dwc3_qcom *qcom = data;
> -	struct dwc3	*dwc = platform_get_drvdata(qcom->dwc3);
> +	struct dwc3 *dwc = qcom->dwc;
>
>  	/* If pm_suspended then let pm_resume take care of resuming h/w */
>  	if (qcom->pm_suspended)
> @@ -699,34 +694,198 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
>  	return 0;
>  }
>
> -static int dwc3_qcom_of_register_core(struct dwc3_qcom *qcom, struct platform_device *pdev)
> +static struct property *dwc3_qcom_legacy_prop_concat(const char *name,
> +						     const void *a, size_t a_len,
> +						     const void *b, size_t b_len)
>  {
> -	struct device_node	*np = pdev->dev.of_node, *dwc3_np;
> -	struct device		*dev = &pdev->dev;
> -	int			ret;
> +	size_t len = a_len + b_len;
>
> -	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
> -	if (!dwc3_np) {
> -		dev_err(dev, "failed to find dwc3 core child\n");
> -		return -ENODEV;
> -	}
> +	struct property *prop __free(kfree) = kzalloc(sizeof(*prop), GFP_KERNEL);
> +	char *prop_name __free(kfree) = kstrdup(name, GFP_KERNEL);
> +	void *value __free(kfree) = kzalloc(len, GFP_KERNEL);
> +	if (!prop || !prop_name || !value)
> +		return NULL;
>
> -	ret = of_platform_populate(np, NULL, NULL, dev);
> -	if (ret) {
> -		dev_err(dev, "failed to register dwc3 core - %d\n", ret);
> -		goto node_put;
> +	prop->name = no_free_ptr(prop_name);
> +	prop->value = no_free_ptr(value);
> +	prop->length = len;
> +
> +	memcpy(prop->value, a, a_len);
> +	memcpy(prop->value + a_len, b, b_len);
> +
> +	return_ptr(prop);
> +}
> +
> +/* Replace reg property with base address from dwc3 node and fixed length */
> +static int dwc3_qcom_legacy_update_reg(struct device_node *qcom,
> +				       struct device_node *dwc3)
> +{
> +	int addr_cells;
> +	int size_cells;
> +	u64 dwc3_addr;
> +	int ret;
> +
> +	ret = of_property_read_reg(dwc3, 0, &dwc3_addr, NULL);
> +	if (ret < 0)
> +		return ret;
> +
> +	addr_cells = of_n_addr_cells(qcom);
> +	size_cells = of_n_addr_cells(qcom);
> +
> +	__be32 *reg __free(kfree) = kcalloc(addr_cells + size_cells, sizeof(__be32), GFP_KERNEL);
> +	if (!reg)
> +		return -ENOMEM;
> +
> +	reg[addr_cells - 1] = cpu_to_be32(dwc3_addr);
> +	reg[addr_cells + size_cells - 1] = cpu_to_be32(SDM845_QSCRATCH_BASE_OFFSET + SDM845_QSCRATCH_SIZE);
> +
> +	struct property *prop __free(kfree)  = kzalloc(sizeof(*prop), GFP_KERNEL);
> +	char *name __free(kfree) = kstrdup("reg", GFP_KERNEL);
> +	if (!prop || !name)
> +		return -ENOMEM;
> +
> +	prop->name = no_free_ptr(name);
> +	prop->value = no_free_ptr(reg);
> +	prop->length = (addr_cells + size_cells) * sizeof(__be32);
> +
> +	return of_update_property(qcom, no_free_ptr(prop));
> +}
> +
> +/* Prepend dwc_usb3 interrupt to relevant interrupt properties */
> +static int dwc3_qcom_legacy_convert_interrupts(struct device_node *qcom,
> +					       struct property *dwc3_irq)
> +{
> +	const __be32 *interrupts;
> +	struct property *new;
> +	const void *names;
> +	int interrupts_len;
> +	int names_len;
> +	int ret;
> +
> +	if ((interrupts = of_get_property(qcom, "interrupts-extended", &interrupts_len)) != NULL) {
> +		struct device_node *parent __free(device_node) = of_irq_find_parent(qcom);
> +		if (!parent)
> +			return -EINVAL;
> +
> +		__be32 *value __free(kfree) = kzalloc(sizeof(__be32) + dwc3_irq->length, GFP_KERNEL);
> +		if (!value)
> +			return -ENOMEM;
> +		value[0] = cpu_to_be32(parent->phandle);
> +		memcpy(&value[1], dwc3_irq->value, dwc3_irq->length);
> +
> +		new = dwc3_qcom_legacy_prop_concat("interrupts-extended",
> +						   value, sizeof(__be32) + dwc3_irq->length,
> +						   interrupts, interrupts_len);
> +	} else if ((interrupts = of_get_property(qcom, "interrupts", &interrupts_len)) != NULL) {
> +		new = dwc3_qcom_legacy_prop_concat("interrupts",
> +						   dwc3_irq->value, dwc3_irq->length,
> +						   interrupts, interrupts_len);
> +	} else {
> +		return -EINVAL;
>  	}
>
> -	qcom->dwc3 = of_find_device_by_node(dwc3_np);
> -	if (!qcom->dwc3) {
> -		ret = -ENODEV;
> -		dev_err(dev, "failed to get dwc3 platform device\n");
> -		of_platform_depopulate(dev);
> +	if (!new)
> +		return -ENOMEM;
> +
> +	ret = of_update_property(qcom, new);
> +	if (ret < 0)
> +		return ret;
> +
> +	names = of_get_property(qcom, "interrupt-names", &names_len);
> +	if (!names)
> +		return -EINVAL;
> +
> +	new = dwc3_qcom_legacy_prop_concat("interrupt-names",
> +					   "dwc_usb3", strlen("dwc_usb3") + 1,
> +					   names, names_len);
> +	if (!new)
> +		return -ENOMEM;
> +
> +	return of_update_property(qcom, new);
> +}
> +
> +/* Copy property to qcom node */
> +static int dwc3_qcom_legacy_migrate_prop(struct device_node *qcom,
> +					 struct property *prop)
> +{
> +	struct property *new __free(kfree) = kzalloc(sizeof(*new), GFP_KERNEL);
> +	char *name __free(kfree) = kstrdup(prop->name, GFP_KERNEL);
> +	void *value __free(kfree) = kmemdup(prop->value, prop->length, GFP_KERNEL);
> +
> +	if (!new || !name || !value)
> +		return -ENOMEM;
> +
> +	new->name = no_free_ptr(name);
> +	new->value = no_free_ptr(value);
> +	new->length = prop->length;
> +
> +	return of_update_property(qcom, no_free_ptr(new));
> +}
> +
> +/* Move a child node, with it's properties and children, from dwc3 to qcom node */
> +static int dwc3_qcom_legacy_migrate_child(struct device_node *qcom,
> +					  struct device_node *dwc3,
> +					  const char *name)
> +{
> +	struct device_node *child;
> +
> +	child = of_get_child_by_name(dwc3, name);
> +	if (!child)
> +		return 0;
> +
> +	of_detach_node(child);
> +	child->parent = qcom;
> +	of_attach_node(child);
> +	of_node_put(child);
> +
> +	return 0;
> +}
> +
> +/* Convert dev's DeviceTree representation from qcom,dwc3 to qcom,snps-dwc3 binding */
> +static int dwc3_qcom_convert_legacy_dt(struct device *dev)
> +{
> +	struct device_node *qcom = dev->of_node;
> +	struct device_node *dwc3;
> +	struct property *prop;
> +	int ret = 0;
> +
> +	dwc3 = of_get_compatible_child(qcom, "snps,dwc3");
> +	if (!dwc3)
> +		return 0;
> +
> +	/* We have a child node, but no support for dynamic OF */
> +	if (!IS_ENABLED(CONFIG_OF_DYNAMIC))
> +		return -EINVAL;
> +
> +	for_each_property_of_node(dwc3, prop) {
> +		if (!strcmp(prop->name, "compatible"))
> +			;
> +		else if (!strcmp(prop->name, "reg"))
> +			ret = dwc3_qcom_legacy_update_reg(qcom, dwc3);
> +		else if (!strcmp(prop->name, "interrupts"))
> +			ret = dwc3_qcom_legacy_convert_interrupts(qcom, prop);
> +		else
> +			ret = dwc3_qcom_legacy_migrate_prop(qcom, prop);
>  	}
>
> -node_put:
> -	of_node_put(dwc3_np);
> +	if (ret < 0)
> +		goto err_node_put;
> +
> +	ret = dwc3_qcom_legacy_migrate_child(qcom, dwc3, "port");
> +	if (ret)
> +		goto err_node_put;
> +
> +	ret = dwc3_qcom_legacy_migrate_child(qcom, dwc3, "ports");
> +	if (ret)
> +		goto err_node_put;
> +
> +	of_detach_node(dwc3);
> +	of_node_put(dwc3);
>
> +	return 0;
> +
> +err_node_put:
> +	of_node_put(dwc3);
>  	return ret;
>  }

Look like you copy children dwc3's property into current glue node.
Can you passdown dwc3's node into dwc3_probe(), let dwc3_probe to handle
these, Or move it into dwc3-core. otherwise, if imx want to do the same
thing, the the same code will be dupicated.

>
> @@ -735,16 +894,21 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>  	struct device_node	*np = pdev->dev.of_node;
>  	struct device		*dev = &pdev->dev;
>  	struct dwc3_qcom	*qcom;
> -	struct resource		*res;
> +	struct resource		res;
>  	int			ret, i;
>  	bool			ignore_pipe_clk;
>  	bool			wakeup_source;
>
> +	ret = dwc3_qcom_convert_legacy_dt(dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to convert legacy OF node\n");
> +		return ret;
> +	}
> +
>  	qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
>  	if (!qcom)
>  		return -ENOMEM;
>
> -	platform_set_drvdata(pdev, qcom);
>  	qcom->dev = &pdev->dev;
>
>  	qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
> @@ -773,10 +937,14 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>  		goto reset_assert;
>  	}
>
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	ret = of_address_to_resource(np, 0, &res);
> +	if (ret < 0)
> +		goto clk_disable;
> +	res.end = res.start + SDM845_QSCRATCH_BASE_OFFSET;
>
> -	qcom->qscratch_base = devm_ioremap_resource(dev, res);
> +	qcom->qscratch_base = devm_ioremap(dev, res.end, SDM845_QSCRATCH_SIZE);
>  	if (IS_ERR(qcom->qscratch_base)) {
> +		dev_err(dev, "failed to map qscratch region: %pe\n", qcom->qscratch_base);

dev_err_probe()?

>  		ret = PTR_ERR(qcom->qscratch_base);
>  		goto clk_disable;
>  	}
> @@ -796,17 +964,17 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>  	if (ignore_pipe_clk)
>  		dwc3_qcom_select_utmi_clk(qcom);
>
> -	ret = dwc3_qcom_of_register_core(qcom, pdev);
> -	if (ret) {
> -		dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
> +	qcom->dwc = dwc3_probe(pdev, &res, true, qcom);
> +	if (IS_ERR(qcom->dwc))  {
> +		ret = dev_err_probe(dev, PTR_ERR(qcom->dwc), "failed to register DWC3 Core\n");
>  		goto clk_disable;
>  	}
>
>  	ret = dwc3_qcom_interconnect_init(qcom);
>  	if (ret)
> -		goto depopulate;
> +		goto remove_core;
>
> -	qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
> +	qcom->mode = usb_get_dr_mode(dev);
>
>  	/* enable vbus override for device mode */
>  	if (qcom->mode != USB_DR_MODE_HOST)
> @@ -819,20 +987,15 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>
>  	wakeup_source = of_property_read_bool(dev->of_node, "wakeup-source");
>  	device_init_wakeup(&pdev->dev, wakeup_source);
> -	device_init_wakeup(&qcom->dwc3->dev, wakeup_source);
>
>  	qcom->is_suspended = false;
> -	pm_runtime_set_active(dev);
> -	pm_runtime_enable(dev);
> -	pm_runtime_forbid(dev);
>
>  	return 0;
>
>  interconnect_exit:
>  	dwc3_qcom_interconnect_exit(qcom);
> -depopulate:
> -	of_platform_depopulate(&pdev->dev);
> -	platform_device_put(qcom->dwc3);
> +remove_core:
> +	dwc3_remove(qcom->dwc);
>  clk_disable:
>  	for (i = qcom->num_clocks - 1; i >= 0; i--) {
>  		clk_disable_unprepare(qcom->clks[i]);
> @@ -846,13 +1009,11 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>
>  static void dwc3_qcom_remove(struct platform_device *pdev)
>  {
> -	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> +	struct dwc3 *dwc = platform_get_drvdata(pdev);
> +	struct dwc3_qcom *qcom = dwc->glue;
>  	struct device *dev = &pdev->dev;
>  	int i;
>
> -	of_platform_depopulate(&pdev->dev);
> -	platform_device_put(qcom->dwc3);
> -
>  	for (i = qcom->num_clocks - 1; i >= 0; i--) {
>  		clk_disable_unprepare(qcom->clks[i]);
>  		clk_put(qcom->clks[i]);
> @@ -868,10 +1029,15 @@ static void dwc3_qcom_remove(struct platform_device *pdev)
>
>  static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
>  {
> -	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
> +	struct dwc3 *dwc = dev_get_drvdata(dev);
> +	struct dwc3_qcom *qcom = dwc->glue;
>  	bool wakeup = device_may_wakeup(dev);
>  	int ret;
>
> +	ret = dwc3_suspend(qcom->dwc);
> +	if (ret)
> +		return ret;
> +
>  	ret = dwc3_qcom_suspend(qcom, wakeup);
>  	if (ret)
>  		return ret;
> @@ -883,7 +1049,8 @@ static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
>
>  static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
>  {
> -	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
> +	struct dwc3 *dwc = dev_get_drvdata(dev);
> +	struct dwc3_qcom *qcom = dwc->glue;
>  	bool wakeup = device_may_wakeup(dev);
>  	int ret;
>
> @@ -893,31 +1060,56 @@ static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
>
>  	qcom->pm_suspended = false;
>
> +	ret = dwc3_suspend(qcom->dwc);
> +	if (ret)
> +		return ret;
> +
>  	return 0;
>  }
>
>  static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev)
>  {
> -	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
> +	struct dwc3 *dwc = dev_get_drvdata(dev);
> +	struct dwc3_qcom *qcom = dwc->glue;
> +	int ret;
> +
> +	ret = dwc3_runtime_suspend(qcom->dwc);
> +	if (ret)
> +		return ret;
>
>  	return dwc3_qcom_suspend(qcom, true);
>  }
>
> +static void __maybe_unused dwc3_qcom_complete(struct device *dev)
> +{
> +	struct dwc3 *dwc = dev_get_drvdata(dev);
> +
> +	dwc3_complete(dwc);
> +}
> +
>  static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev)
>  {
> -	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
> +	struct dwc3 *dwc = dev_get_drvdata(dev);
> +	struct dwc3_qcom *qcom = dwc->glue;
> +	int ret;
> +
> +	ret = dwc3_qcom_resume(qcom, true);
> +	if (ret)
> +		return ret;
>
> -	return dwc3_qcom_resume(qcom, true);
> +	return dwc3_runtime_resume(qcom->dwc);
>  }
>
>  static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
>  	SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume)
>  	SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume,
>  			   NULL)
> +	.complete = dwc3_qcom_complete,
>  };
>
>  static const struct of_device_id dwc3_qcom_of_match[] = {
>  	{ .compatible = "qcom,dwc3" },
> +	{ .compatible = "qcom,snps-dwc3" },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
>
> --
> 2.45.2
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux