On Tue, Aug 13, 2024 at 11:50:41AM +0000, Agarwal, Utsav wrote: > > > > -----Original Message----- > > From: Rob Herring (Arm) <robh@xxxxxxxxxx> > > Sent: Tuesday, August 13, 2024 12:12 PM > > To: Agarwal, Utsav <Utsav.Agarwal@xxxxxxxxxx> > > Cc: devicetree@xxxxxxxxxxxxxxx; Hennerich, Michael > > <Michael.Hennerich@xxxxxxxxxx>; Gaskell, Oliver > > <Oliver.Gaskell@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Sa, Nuno > > <Nuno.Sa@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; Bimpikas, Vasileios > > <Vasileios.Bimpikas@xxxxxxxxxx>; Conor Dooley > > <conor.dooley@xxxxxxxxxxxxx>; Artamonovs, Arturs > > <Arturs.Artamonovs@xxxxxxxxxx>; Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>; > > linux-input@xxxxxxxxxxxxxxx; Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > > Subject: Re: [PATCH v10 3/3] dt-bindings: input: pure gpio support for adp5588 > > > > [External] > > > > > > On Tue, 13 Aug 2024 10:51:33 +0100, Utsav Agarwal wrote: > > > Adding software support for enabling the pure gpio capability of the > > > device - which allows all I/O to be used as GPIO. Previously, I/O > > > configuration was limited by software to partial GPIO support only. > > > > > > When working in a pure gpio mode, the device does not require the > > > certain properties and hence, the following are now made optional: > > > - interrupts > > > - keypad,num-rows > > > - keypad,num-columns > > > - linux,keymap > > > > > > However, note that the above are required to be specified when > > > configuring the device as a keypad, for which dependencies have been added > > > such that specifying either one requires the remaining as well. > > > > > > Also, note that interrupts are made optional, but required when the device > > > has either been configured in keypad mode or as an interrupt controller. > > > This has been done since they may not necessarily be used when leveraging > > > the device purely for GPIO. > > > > > > Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > > > Signed-off-by: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx> > > > --- > > > .../devicetree/bindings/input/adi,adp5588.yaml | 40 ++++++++++++++++++- > > --- > > > 1 file changed, 34 insertions(+), 6 deletions(-) > > > > > > > My bot found errors running 'make dt_binding_check' on your patch: > > > > yamllint warnings/errors: > > ./Documentation/devicetree/bindings/input/adi,adp5588.yaml:140:1: [error] > > syntax error: could not find expected ':' (syntax) > > > > dtschema/dtc warnings/errors: > > /builds/robherring/dt-review- > > ci/linux/Documentation/devicetree/bindings/input/adi,adp5588.yaml: ignoring, > > error parsing file > > ./Documentation/devicetree/bindings/input/adi,adp5588.yaml:140:1: could not > > find expected ':' > > make[2]: *** Deleting file > > 'Documentation/devicetree/bindings/input/adi,adp5588.example.dts' > > Documentation/devicetree/bindings/input/adi,adp5588.yaml:140:1: could not > > find expected ':' > > make[2]: *** [Documentation/devicetree/bindings/Makefile:26: > > Documentation/devicetree/bindings/input/adi,adp5588.example.dts] Error 1 > > make[2]: *** Waiting for unfinished jobs.... > > make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1432: > > dt_binding_check] Error 2 > > make: *** [Makefile:224: __sub-make] Error 2 > > > > Apologies, it seems like I accidently deleted the characters towards the end > of the yaml file when making changes... If you make any changes, particularly to an already reviewed binding, please be sure to run the tests again before sending. Thanks, Conor.
Attachment:
signature.asc
Description: PGP signature
