Re: [RFC 14/18] dt: bindings: Add bindings for omap3isp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Sakari,

Thank you for the patch.

On Saturday 07 March 2015 23:41:11 Sakari Ailus wrote:
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx>
> ---
>  .../devicetree/bindings/media/ti,omap3isp.txt      |   64 +++++++++++++++++
>  MAINTAINERS                                        |    1 +
>  2 files changed, 65 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/ti,omap3isp.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/ti,omap3isp.txt
> b/Documentation/devicetree/bindings/media/ti,omap3isp.txt new file mode
> 100644
> index 0000000..2059524
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
> @@ -0,0 +1,64 @@
> +OMAP 3 ISP Device Tree bindings
> +===============================
> +
> +More documentation on these bindings is available in
> +video-interfaces.txt in the same directory.
> +
> +Required properties
> +===================
> +
> +compatible	: "ti,omap3-isp"

I would rephrase that using the usual wording as "compatible: Must contain 
"ti,omap3-isp".

> +reg		: a set of two register block physical addresses and
> +		  lengths

We should describe what each set represents and contains.

> +interrupts	: the interrupt number

I would keep the wording generic and refer to interrupt specifier instead of 
interrupt number.

"interrupts: the ISP interrupt specifier"

> +iommus		: phandle of the IOMMU

Similarly,

"iommus: phandle and IOMMU specifier for the IOMMU that serves the ISP"

> +syscon		: syscon phandle and register offset

We should document what the register offset is.

> +ti,phy-type	: 0 -- 3430; 1 -- 3630

Would it make sense to add #define's for this ?

It could also make sense to document/name them "Complex I/O" and "CSIPHY" to 
avoid referring to the SoC that implements them, as the ISP is also found in 
SoCs other than 3430 and 3630.

Could the PHY type be derived from the ES revision that we query at runtime ?

We should also take into account the fact that the DM3730 has officially no 
CSIPHY, but still seems to implement them in practice.

> +#clock-cells	: Must be 1 --- the ISP provides two external clocks,
> +		  cam_xclka and cam_xclkb, at indices 0 and 1,
> +		  respectively. Please find more information on common
> +		  clock bindings in ../clock/clock-bindings.txt.
> +
> +Port nodes (optional)
> +---------------------

This should refer to Documentation/devicetree/bindings/media/video-
interfaces.txt.

> +reg		: The interface:
> +		  0 - parallel (CCDC)
> +		  1 - CSIPHY1 -- CSI2C / CCP2B on 3630;
> +		      CSI1 -- CSIb on 3430
> +		  2 - CSIPHY2 -- CSI2A / CCP2B on 3630;
> +		      CSI2 -- CSIa on 3430
> +
> +Optional properties
> +===================
> +
> +vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1
> +vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2
> +
> +Endpoint nodes
> +--------------
> +
> +lane-polarity	: lane polarity (required on CSI-2)
> +		  0 -- not inverted; 1 -- inverted
> +data-lanes	: an array of data lanes from 1 to 3. The length can
> +		  be either 1 or 2. (required CSI-2)

s/required/required on/ ?

> +clock-lanes	: the clock lane (from 1 to 3). (required on CSI-2)
> +
> +
> +Example
> +=======
> +
> +		omap3_isp: omap3_isp@480bc000 {

DT node names traditionally use - as a separator. Furthermore the phandle 
isn't needed. This should thus probably be

	omap3-isp@480bc000 {

> +			compatible = "ti,omap3-isp";
> +			reg = <0x480bc000 0x12fc
> +			       0x480bd800 0x0600>;
> +			interrupts = <24>;
> +			iommus = <&mmu_isp>;
> +			syscon = <&omap3_scm_general 0x2f0>;
> +			ti,phy-type = <1>;
> +			#clock-cells = <1>;
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ddc5a8c..cdeef39 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7079,6 +7079,7 @@ L:	linux-media@xxxxxxxxxxxxxxx
>  S:	Maintained
>  F:	drivers/media/platform/omap3isp/
>  F:	drivers/staging/media/omap4iss/
> +F:	Documentation/devicetree/bindings/media/ti,omap3isp.txt

I would move this line before the other F: entries to keep them alphabetically 
sorted.

>  OMAP USB SUPPORT
>  M:	Felipe Balbi <balbi@xxxxxx>

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux