Am Mittwoch, 11. März 2015, 15:15:17 schrieb Doug Anderson:
> Specifying these rails should eventually let us do UHS.
>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
This one looks good to me and I'll take it into my dts branch.
But due to the deferal issue fixed in patch1, I'll wait a bit for patch1
hopefully getting applied, so that we have a "clean" behaviour when everything
reaches linux-next.
> ---
> Changes in v4:
> - Add vcc_sd regulator which is present on EVB 2.0 boards
>
> Changes in v3: None
> Changes in v2:
> - Fix subject line
>
> arch/arm/boot/dts/rk3288-evb.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi
> b/arch/arm/boot/dts/rk3288-evb.dtsi index 5e895a5..6d4ae9f 100644
> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
> @@ -103,6 +103,23 @@
> regulator-always-on;
> regulator-boot-on;
> };
> +
> + /*
> + * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
> + * vcc_io directly. Those boards won't be able to power cycle SD cards
> + * but it shouldn't hurt to toggle this pin there anyway.
> + */
> + vcc_sd: sdmmc-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_pwr>;
> + regulator-name = "vcc_sd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + startup-delay-us = <100000>;
> + vin-supply = <&vcc_io>;
> + };
> };
>
> &emmc {
> @@ -132,6 +149,8 @@
> pinctrl-names = "default";
> pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> status = "okay";
> + vmmc-supply = <&vcc_sd>;
> + vqmmc-supply = <&vccio_sd>;
> };
>
> &i2c0 {
> @@ -223,6 +242,10 @@
> sdmmc_cmd: sdmmc-cmd {
> rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
> };
> +
> + sdmmc_pwr: sdmmc-pwr {
> + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> };
>
> usb {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
