[PATCH v2 6/7] ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes

[Andrei Simion <andrei.simion@xxxxxxxxxxxxx>]

Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.

Co-developed-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
Signed-off-by: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node
---
 .../boot/dts/microchip/at91-sama5d27_wlsom1.dtsi    | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index 4617805c7748..c173f49cb910 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -31,6 +31,14 @@ main_xtal {
 		};
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-wilc1000";
 		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
@@ -70,6 +78,11 @@ &i2c1 {
 	mcp16502@5b {
 		compatible = "microchip,mcp16502";
 		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
 		status = "okay";
 		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
 
-- 
2.34.1