[PATCH v2 5/7] ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes

[Andrei Simion <andrei.simion@xxxxxxxxxxxxx>]

Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.

Co-developed-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
Signed-off-by: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
---
v1 -> v2:
- drop (lvin|pvin[1-4])-supply from each regulators sub-node
- add lvin-supply, pvin[1-4]-supply to PMIC node
---
 arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index 999adeca6f33..5e2bb517a480 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -78,6 +78,14 @@ led-blue {
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -190,6 +198,11 @@ i2c6: i2c@600 {
 		mcp16502@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
 			status = "okay";
 			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
 
-- 
2.34.1