[PATCH v4 1/3] dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yang Li <yang.li@xxxxxxxxxxx>

Add binding document for Amlogic Bluetooth chipsets attached over UART.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Yang Li <yang.li@xxxxxxxxxxx>
---
 .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml  | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml
new file mode 100644
index 000000000000..6fd7557039d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/amlogic,w155s2-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Bluetooth chips
+
+description:
+  The W155S2 is an Amlogic Bluetooth and Wi-Fi combo chip. It works on
+  the standard H4 protocol via a 4-wire UART interface, with baud rates
+  up to 4 Mbps.
+
+maintainers:
+  - Yang Li <yang.li@xxxxxxxxxxx>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,w265s1-bt
+              - amlogic,w265p1-bt
+          - const: amlogic,w155s2-bt
+      - enum:
+          - amlogic,w155s2-bt
+          - amlogic,w265s2-bt
+
+  clocks:
+    maxItems: 1
+    description: clock provided to the controller (32.768KHz)
+
+  enable-gpios:
+    maxItems: 1
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  firmware-name:
+    maxItems: 1
+    description: specify the path of firmware bin to load
+
+required:
+  - compatible
+  - clocks
+  - enable-gpios
+  - vddio-supply
+  - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    bluetooth {
+        compatible = "amlogic,w155s2-bt";
+        clocks = <&extclk>;
+        enable-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        vddio-supply = <&wcn_3v3>;
+        firmware-name = "amlogic/aml_w155s2_bt_uart.bin";
+    };
+

-- 
2.42.0






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux