Add support for Amlogic HCI UART, including dt-binding, and Amlogic Bluetooth driver. Signed-off-by: Yang Li <yang.li@xxxxxxxxxxx> --- Changes in v4: - Modified the compatible list in the DT binding. - Reduced the boot delay from 350ms to 60ms. - Minor fixes. - Link to v3: https://lore.kernel.org/r/20240802-btaml-v3-0-d8110bf9963f@xxxxxxxxxxx Changes in v3: - Updated the properties within the device tree binding file. - Remove the "antenna-number" property. - Performed code optimization for improved efficiency and readability. - Link to v2: https://lore.kernel.org/r/20240718-btaml-v2-0-1392b2e21183@xxxxxxxxxxx Changes in v2: - Introduce a regulator for powering up the Bluetooth chip instead of power sequencing. - Use the GPIO Consumer API to manipulate the GPIO pins instead of the legacy API. - Minor fixes. - Link to v1: https://lore.kernel.org/r/20240705-btaml-v1-0-7f1538f98cef@xxxxxxxxxxx --- Yang Li (3): dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth Bluetooth: hci_uart: Add support for Amlogic HCI UART MAINTAINERS: Add an entry for Amlogic HCI UART (M: Yang Li) .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml | 63 ++ MAINTAINERS | 7 + drivers/bluetooth/Kconfig | 12 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/hci_aml.c | 755 +++++++++++++++++++++ drivers/bluetooth/hci_ldisc.c | 8 +- drivers/bluetooth/hci_uart.h | 8 +- 7 files changed, 851 insertions(+), 3 deletions(-) --- base-commit: bd0b4dae74b0f0ee9ea37818e1c132b56a26d6dd change-id: 20240418-btaml-f9d7b19724ab Best regards, -- Yang Li <yang.li@xxxxxxxxxxx>
