From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
Different socs have initialization operations in
the probe process, which are summarized as functions.
This patch first factor out init function for th1520.
Signed-off-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>
Reviewed-by: Drew Fustini <drew@xxxxxxxx>
Tested-by: Drew Fustini <drew@xxxxxxxx> # TH1520
Tested-by: Inochi Amaoto <inochiama@xxxxxxxxxxx> # Duo and Huashan Pi
---
drivers/mmc/host/sdhci-of-dwcmshc.c | 51 +++++++++++++++++------------
1 file changed, 30 insertions(+), 21 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index a002636d51fd..b272ec2ab232 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -830,6 +830,35 @@ static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask)
}
}
+static int th1520_init(struct device *dev,
+ struct sdhci_host *host,
+ struct dwcmshc_priv *dwc_priv)
+{
+ dwc_priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
+
+ if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
+ device_property_read_bool(dev, "mmc-hs200-1_8v") ||
+ device_property_read_bool(dev, "mmc-hs400-1_8v"))
+ dwc_priv->flags |= FLAG_IO_FIXED_1V8;
+ else
+ dwc_priv->flags &= ~FLAG_IO_FIXED_1V8;
+
+ /*
+ * start_signal_voltage_switch() will try 3.3V first
+ * then 1.8V. Use SDHCI_SIGNALING_180 rather than
+ * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
+ * in sdhci_start_signal_voltage_switch().
+ */
+ if (dwc_priv->flags & FLAG_IO_FIXED_1V8) {
+ host->flags &= ~SDHCI_SIGNALING_330;
+ host->flags |= SDHCI_SIGNALING_180;
+ }
+
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
static void cv18xx_sdhci_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1231,27 +1260,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
}
if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) {
- priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
-
- if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
- device_property_read_bool(dev, "mmc-hs200-1_8v") ||
- device_property_read_bool(dev, "mmc-hs400-1_8v"))
- priv->flags |= FLAG_IO_FIXED_1V8;
- else
- priv->flags &= ~FLAG_IO_FIXED_1V8;
-
- /*
- * start_signal_voltage_switch() will try 3.3V first
- * then 1.8V. Use SDHCI_SIGNALING_180 rather than
- * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
- * in sdhci_start_signal_voltage_switch().
- */
- if (priv->flags & FLAG_IO_FIXED_1V8) {
- host->flags &= ~SDHCI_SIGNALING_330;
- host->flags |= SDHCI_SIGNALING_180;
- }
-
- sdhci_enable_v4_mode(host);
+ th1520_init(dev, host, priv);
}
#ifdef CONFIG_ACPI
--
2.34.1
