On Mon, Aug 05, 2024 at 09:31:24AM GMT, Chen Wang wrote:
> Why this patch change the dts?
>
My fault, this should be merged into the previous patch.
Regards,
Inochi
> On 2024/8/2 20:38, Inochi Amaoto wrote:
> > Enable MCU driver for SG2042 to provide thermal and reboot support.
> >
> > Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx>
> > Tested-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>
> > Reviewed-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>
> > ---
> > arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts | 2 +-
> > arch/riscv/configs/defconfig | 1 +
> > 2 files changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
> > index 8b8fdf6243d4..76375e25a495 100644
> > --- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
> > +++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
> > @@ -67,7 +67,7 @@ soc_active3: soc-active3 {
> > };
> > soc_hot: soc-hot {
> > - temperature = <85000>;
> > + temperature = <80000>;
> > hysteresis = <5000>;
> > type = "hot";
> > };
> > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> > index 0d678325444f..a0f346301df6 100644
> > --- a/arch/riscv/configs/defconfig
> > +++ b/arch/riscv/configs/defconfig
> > @@ -170,6 +170,7 @@ CONFIG_SPI_SUN6I=y
> > CONFIG_GPIO_SIFIVE=y
> > CONFIG_POWER_RESET_GPIO_RESTART=y
> > CONFIG_SENSORS_SFCTEMP=m
> > +CONFIG_SENSORS_SG2042_MCU=y
> > CONFIG_CPU_THERMAL=y
> > CONFIG_DEVFREQ_THERMAL=y
> > CONFIG_RZG2L_THERMAL=y
