Why this patch change the dts?
On 2024/8/2 20:38, Inochi Amaoto wrote:
Enable MCU driver for SG2042 to provide thermal and reboot support.
Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx>
Tested-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>
Reviewed-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>
---
arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts | 2 +-
arch/riscv/configs/defconfig | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index 8b8fdf6243d4..76375e25a495 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -67,7 +67,7 @@ soc_active3: soc-active3 {
};
soc_hot: soc-hot {
- temperature = <85000>;
+ temperature = <80000>;
hysteresis = <5000>;
type = "hot";
};
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 0d678325444f..a0f346301df6 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -170,6 +170,7 @@ CONFIG_SPI_SUN6I=y
CONFIG_GPIO_SIFIVE=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_SENSORS_SFCTEMP=m
+CONFIG_SENSORS_SG2042_MCU=y
CONFIG_CPU_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_RZG2L_THERMAL=y