On Sun, 04 Aug 2024 13:41:05 +0200, Christian Marangi wrote: > Add Documentation for Airoha fixed-partitions compatibles. > > Airoha based SoC declare a dedicated partition at the end of the flash to > store calibration and device specific data, in addition to fixed > partitions. > The offset of this special partition is not well defined as it depends on > flash bad block management that might require reserving additional space > at the end of the flash. > > This binding allows defining all fixed partitions and marking the last one > to detect the correct offset. > > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> > --- > .../partitions/airoha,fixed-partitions.yaml | 80 +++++++++++++++++++ > 1 file changed, 80 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/partitions/airoha,fixed-partitions.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/mtd/partitions/airoha,fixed-partitions.example.dtb: /example-0/partitions: failed to match any schema with compatible: ['airoha,fixed-partitions'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240804114108.1893-6-ansuelsmth@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
